| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic p.c for recording
Reply to topic
Author Topic:  p.c for recording
Gary Moore

 

From:
Mobile, Alabama, USA
Post  Posted 6 Jul 2011 4:26 am    
Reply with quote

Is A p.c good for Home recording studio it has 4 gb ram. dual ps,firewire, what else does it need to be a good recording p.c thanks. p.c is a dell 410.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 6 Jul 2011 5:38 am    
Reply with quote

An XPS410 will be OK for SOME recording programs. Just depends on what recording program you want to use and what audio recording interface you want to use.

The Firewire port is suspect, as most firewire audio recording devices need a Texas Instruments (TI) firewire port chip to work or work correctly. I don't know what is on an XPS 410 motherboard (or do you have a separate SoundBlaster with the port?) so that is one questionable area.

What OS do you have? the original XP or have you upgraded to Vista or Windows 7? That will also determine the recording program and hardware that you can use.

I have a Dell Dimension E510 (has a D925 dual core CPU), with Vista 32 bit and 4GB of RAM that I have used with Sonar, but it does not have a Firewire port and I had a SoundBlaster (used to have) that had a useable firewire port. Otherwise it ran Sonar 7 without problems for at least 6 analog channels and 1 MIDI channel.

My current recording system is a Q6600 Quad CPU, 8GB of RAM and Windows 7 64 bit that I run Sonar X1.
View user's profile Send private message Send e-mail
Gary Moore

 

From:
Mobile, Alabama, USA
Post  Posted 7 Jul 2011 4:26 am     X p
Reply with quote

thanks jack it is a xps410 it has dual quad 6600 pcu 4 gb ram , i had to install the firewire card in came with out one, i have studio one, & pro tools 8 m- powered solfware an lots of plugins, also the interface is a firetube presonus,os is XP thanks i am going to see if it will recorded 8 track.s at once,s drum mic,'s .hope i have good luck.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 7 Jul 2011 5:14 am    
Reply with quote

Just one comment, it doesn't have a "dual quad" it just has a quad Q6600 CPU. That is what I have in my PC that I run Sonar X1.
View user's profile Send private message Send e-mail
Gary Shepherd


From:
Fox, Oklahoma, USA
Post  Posted 17 Jul 2011 3:10 pm    
Reply with quote

Gary, just download a demo of Sonar or some other recording program and try it. Won't cost you anything. The Sonar demo runs for 30 days I think.
_________________
Gary Shepherd

Carter D-10 & Peavey Nashville 1000

www.16tracks.com
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Gary Moore

 

From:
Mobile, Alabama, USA
Post  Posted 18 Jul 2011 4:47 am     p.c
Reply with quote

I was running 12 tracks in studio one Daw with waves plugins & my c.p.u was 20% is that good are bad thanks for the info.
View user's profile Send private message Send e-mail
Gary Shepherd


From:
Fox, Oklahoma, USA
Post  Posted 18 Jul 2011 7:47 am    
Reply with quote

I wouldn't worry too much about what the numbers say. If it sounds good, it is good. If you can do as many tracks as you need with as many plugins as you need, then record it. And you can always upgrade your hardware later.
_________________
Gary Shepherd

Carter D-10 & Peavey Nashville 1000

www.16tracks.com
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron