| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Question for Paul Franklin
Reply to topic
Author Topic:  Question for Paul Franklin
Joshua Bertrand

 

From:
Tennessee, USA
Post  Posted 24 Jun 2011 6:35 am    
Reply with quote

Hey Paul I believe I've got some conflicting information about one of your changes.
Do you lower or raise your 6th string from G# to E?
View user's profile Send private message Send e-mail
Don Brown, Sr.

 

From:
New Jersey
Post  Posted 24 Jun 2011 7:21 am    
Reply with quote

Hi Josh,

Look at your question, and it will become obvious, that Paul wouldn't be raising (nor anyone else) a string 8 (1/2) tones.

So the only thing left, is he must be lowering, which is still a large drop down of 3 (1/2) tones. But yes, it would be a drop (lowering).

Hope that helps you..... and have fun...
View user's profile Send private message
Joshua Bertrand

 

From:
Tennessee, USA
Post  Posted 24 Jun 2011 7:50 am    
Reply with quote

Lol that was my assumption also but believe it or not I've had more than 1 person tell me he's raising.
View user's profile Send private message Send e-mail
Don Brown, Sr.

 

From:
New Jersey
Post  Posted 24 Jun 2011 8:11 am    
Reply with quote

Very Happy
View user's profile Send private message
Larry Bell


From:
Englewood, Florida
Post  Posted 24 Jun 2011 9:26 am    
Reply with quote

He has been known to raise 6 G# to B
FWIW
_________________
Larry Bell - email: larry@larrybell.org - gigs - Home Page
My CD's: 'I've Got Friends in COLD Places' - 'Pedal Steel Guitar'
2021 Rittenberry S/D-12 8x7, 1976 Emmons S/D-12 7x6, 1969 Emmons S/D-12 6x6, 1971 Dobro, Quilter ToneBlock 202 TT-12
View user's profile Send private message Send e-mail Visit poster's website
Jim Hollingsworth

 

From:
Way out West
Post  Posted 24 Jun 2011 10:09 am    
Reply with quote

There was a recent post on that subject. Seems that Paul has a Raise from G# to B and a lower from G# to E on the same knee lever - he then engages (with nylon tuner nut) whichever change he feels inclined to use. It's a great idea. I had several extra pulls added on my Rittenberry which I usually don't use -but they are there if I need them!

Jim
View user's profile Send private message Send e-mail
Jerome Hawkes


From:
Fayetteville, North Carolina, USA
Post  Posted 24 Jun 2011 11:23 am    
Reply with quote

i saw (and got to meet) paul last month at a vince gill concert - we had good seats on the steel side and i noticed that he constantly was reaching over near the changer to "switch something" - - this baffled me - coil tap? - but this post may explain what he was doing - engaging different changes
_________________
'65 Sho-Bud D-10 Permanent • '54 Fender Dual-8 • Clinesmith T-8 • '38 Ric Bakelite • '92 Emmons D-10 Legrande II
View user's profile Send private message Send e-mail
Jim Smith


From:
Midlothian, TX, USA
Post  Posted 25 Jun 2011 10:17 am    
Reply with quote

Jerome Hawkes wrote:
i saw (and got to meet) paul last month at a vince gill concert - we had good seats on the steel side and i noticed that he constantly was reaching over near the changer to "switch something" - - this baffled me - coil tap? - but this post may explain what he was doing - engaging different changes

He has two RKRs, one for each neck. He folds one up and the other down when he changes necks. Maybe that's what you saw.
View user's profile Send private message Send e-mail
Joe Rogers

 

From:
Lake Charles, LA USA
Post  Posted 9 Jul 2011 3:12 pm    
Reply with quote

Jerome Hawkes wrote:
....i noticed that he constantly was reaching over near the changer to "switch something" - - this baffled me



Jerome, it is the turbo switch he has installed on all of his guitars. He usually only uses it in cases of extreme emergency though... Laughing Laughing

Joe Rogers
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron