Larry Haas
From: Morganton, North Carolina USA
|
Posted 6 May 2011 2:47 am
|
|
I picked up an old Rus-Ler S10, 3P/3Knee, and I am looking for a couple of parts to restore it. I need a few of the rod holders that fits inside the shaft fingers or cams. They are 3/8x3/8 round with a set screw in the end. The rod hole is 1/8. It has only 3 knee levers and if I could find the parts for the left knee right, I would be a happy camper. There are a couple of other parts but I would have to talk to someone about what they are and the size's like brass bushings and nylon bushings.
Any one know who might could help? I was told that Desert Rose might be the one to call but I haven't called yet since I just got it and doing some major cleaning and adjusting.
Thanks for any info in advance.
Larry |
|
Tim Cook
From: San Diego, California, USA
|
Posted 6 May 2011 8:31 am RUS-LER parts
|
|
Chuck Back(@Desert Rose steel guitar)is your man... he's got the remaining Rus-ler/Flynn parts at his shop(lots!)...betcha he's got what you need... good luck! _________________ "STEELBONE" Desert Rose S-10,Evans/Webb/JBL D130,King 2B,3B (T-Bones),'67 Hohner Corona IIIR button box |
|