| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Alesis midiverb
Reply to topic
Author Topic:  Alesis midiverb
Rene Brosseau


From:
Chatham,Ontario, Canada
Post  Posted 22 Mar 2011 9:13 pm    
Reply with quote

Any use one of these rackmount units for delay & reverb?
_________________
Franklin #130, Melobar Skreemer, Wechter Scheerhorn Resonator, Nashville 112, Boss DD 3
View user's profile Send private message Send e-mail
Gerry Simon


From:
Ohio, USA
Post  Posted 23 Mar 2011 12:01 am    
Reply with quote

Had 2 midiverbs and 2 quadraverbs...only 1 quad still works...would guess not the most rugged of equipment but decent sound for cheap at the time they were out...
View user's profile Send private message Send e-mail
Rich Hlaves


From:
Wildomar, California, USA
Post  Posted 23 Mar 2011 9:04 am    
Reply with quote

I have 3 of the MidiVerb II units. One in my PA rack, one in my 6 string rack and one in my studio. All work just fine. I also have a MicroVerb in the 6 string rack. Good stuff for cheap.

The only drawback is they don't do multi effects as the newer units do the III and IV I think.
_________________
On man....let the smoke out of another one.
View user's profile Send private message Send e-mail
Rene Brosseau


From:
Chatham,Ontario, Canada
Post  Posted 23 Mar 2011 9:15 am     Alesis
Reply with quote

The one I'll be getting is a Midiverb4
_________________
Franklin #130, Melobar Skreemer, Wechter Scheerhorn Resonator, Nashville 112, Boss DD 3
View user's profile Send private message Send e-mail
LARRY COLE

 

From:
LANCASTER, OHIO, USA
Post  Posted 23 Mar 2011 5:26 pm    
Reply with quote

I had a Midiverb 3 that I got used. Sounded gooe. When it broke I borrowed a Midiverb 4 and it was so much better. You have to run it between the preamp and power amp and they are super quiet and work great.
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 13 Apr 2011 7:22 pm    
Reply with quote

The Midiverb 4 has two ins and two outs.
Can I use two separate steel guitars through one MidiVerb 4 to one amp?
Haven't purchased the unit yet.
Thanks
View user's profile Send private message Send e-mail
Rich Hlaves


From:
Wildomar, California, USA
Post  Posted 14 Apr 2011 7:22 am    
Reply with quote

Gary,
That's not going to work. Your output from the MidiVerb is stereo if you choose to plug into both outputs. Two amps or a stereo power amp with two speakers yes but two seperate guitars in front sorry but no. You can use an A/B switch box to run a two guitar rig.
_________________
On man....let the smoke out of another one.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron