| Author |
Topic: Interactive Excel Spredsheet - free for the taking |
Ed Baker
From:
Connecticut, USA
|
Posted 7 Feb 2011 5:49 am |
|
Long ago, I designed two Excel spreadsheets that are useful for composing and learning things for the pedal steel.
There's one for that standard E9th tuning and one for the C6th.
I guarantee that these files are virus free and they consist of just the cell display and supporting macros.
You just load the sheets, and the pedal buttons at the bottom perform their normal pedal and knee lever operations. You can also change the open tuning by clicking on the notes at the nut.
Both sheets come "as is" and, as always, your mileage may vary with how useful you think they are. You must have Excel 97 or later to run these sheets. Don't ask to have them adapted to an older version of Excel. It's not possible.
Just send me an email and I'll forward them to you.
Ed Baker |
|
|
 |
Ed Baker
From:
Connecticut, USA
|
Posted 7 Feb 2011 5:50 am Interactive Excel Spredsheet - free for the taking
|
|
whoops: I forgot to include my email address:
ejbnorfolk@yahoo.com |
|
|
|
Don Hinkle
From:
Springfield Illinois, USA
|
Posted 7 Feb 2011 6:57 am
|
|
email sent
Thanks!
Don
_________________
Emmons Legrande III SD10
Emmons Legrande III D10
Session 400
Fender guitars
Fender amps |
|
|
|
James Maxwell
From:
Ohio, USA
|
Posted 7 Feb 2011 7:22 am
|
|
| Looks nice, email sent! |
|
|
|
Ed Baker
From:
Connecticut, USA
|
Posted 7 Feb 2011 7:32 am Interactive Excel Spredsheet
|
|
Hello all,
I've had quite a few response for the spreadsheets already, and all but one had them working "out of the box".
IF the display looks chopped off when you open the sheet, just grab the lower right corner and drag it out.
If you have trouble getting the spreadsheets working, you'll have to contact a local pc "guru".
I won't be able to help you remotely.
Remember two things: [1]make a copy before you use them [2] answer "NO" when it asks you if you want to save the spreadsheet.
Remember this too. This is "Freeware". Your mileage may vary.
happy steeling
Ed |
|
|
|
Tim Bridges
From:
Hoover, Alabama, USA
|
Posted 7 Feb 2011 12:31 pm
|
|
| Ed, can one edit for a particular copedant for both tunings? |
|
|
|
Ed Baker
From:
Connecticut, USA
|
Posted 7 Feb 2011 12:47 pm
|
|
Unfortunately, no.
You can change the open tuning at the nut.
But, the pedal pulls won't change. |
|
|
|
Arne Odegard
From:
Norway
|
Posted 7 Feb 2011 8:19 pm
|
|
Email request sent...
Looks good! |
|
|
|
John Wilson
From:
Ventura, California, USA
|
Posted 7 Feb 2011 10:00 pm Ed - email sent.
|
|
My tuning is a bit different but I'd like to try it.
Thanks,
John
_________________
Customer: "Waiter, how do you prepare your chicken?"
Waiter: "We usually tell them they're not going to make it." |
|
|
|
Alexander Douglas
From:
Belfast, N. Ireland
|
Posted 8 Feb 2011 3:55 am spreadsheet
|
|
ed,
email sent,
alex |
|
|
|
Sherman Willden
From:
Colorado Springs, Colorado, USA
|
Posted 8 Feb 2011 12:44 pm
|
|
Thank you, Ed. I have mine
_________________
Sherman L. Willden
It is easy to play the steel guitar. Playing so that the audience finds it pleasing is the difficult act. |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 8 Feb 2011 2:57 pm Thanks, Ed
|
|
Ed, thanks, for sharing these with me and the other Forum members. They will be of help to me even though I've been playing steel for years. Will REALLY be helpful to beginners.
stevet |
|
|
|
Eldon Cangas
From:
Ontario, Canada
|
Posted 8 Feb 2011 3:38 pm
|
|
| Ed, could you send me one please, thanks! Eldon |
|
|
|
Skip Ellis
From:
Bradenton, Fl USA
|
Posted 8 Feb 2011 4:02 pm
|
|
Could I get a copy of the spreadsheets?
Thanks!!
surv450@aol.com
_________________
2013 Brook Torridge, 2014 Martin 000-18, two homebrew Teles, Evans RE200 amp, Quilter 101R head, understanding wife of 45 years. 'Steeless' at the moment but looking...... |
|
|
|
Peter Harris
From:
South Australia, Australia
|
Posted 9 Feb 2011 1:03 am
|
|
Thank you Ed... It's up-and-running Down Under..  |
|
|
|
Eldon Cangas
From:
Ontario, Canada
|
Posted 9 Feb 2011 10:18 am
|
|
| Got it Ed Thanks |
|
|
|
Alfred Ewell
From:
Virginia, USA
|
Posted 9 Feb 2011 1:21 pm
|
|
Email sent. Thanks Ed! Should be lots more fun than the 1040 spreadsheet.  |
|
|
|
Dave McKeough
From:
Nova Scotia, Canada
|
Posted 9 Feb 2011 3:49 pm
|
|
Got it Ed...works great, thanks a million!
Dave |
|
|
|
Scott Denniston
From:
Hahns Peak, Colorado, USA
|
Posted 9 Feb 2011 4:02 pm
|
|
| I'd like one too Ed. Thanks! Hope it works in Excell viewer. |
|
|
|
Richard Alderson
From:
Illinois, USA
|
Posted 10 Feb 2011 7:18 am PM sent
|
|
Dear Ed - Great Idea. Have sent private message. Would love to have this spreadsheet application.
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500. |
|
|
|
Eric Dahlhoff
From:
Point Arena, California
|
Posted 13 Feb 2011 8:50 am Cool!
|
|
| Ed, thanks for the spreadsheet - it works fine. |
|
|
|
Paul Sutherland
From:
Placerville, California
|
Posted 16 Feb 2011 8:17 pm
|
|
Ed: I would like to receive the excel spreadsheet. I tried to send you an email more than a week ago, and it seemed to have gone through, but I haven't heard anything from you or receive the program. Maybe I did something wrong. I'll send another email right now and hope the message gets through. Thanks for your help. Paul
Last edited by Paul Sutherland on 17 Feb 2011 5:12 pm; edited 1 time in total |
|
|
|
Paul Fry
From:
Frankfort, Indiana, USA
|
Posted 17 Feb 2011 4:17 pm
|
|
Would like to receive your spreadsheets. Thanks!
pauldfry@comcast.net
_________________
Setup; MSA S12, POD XT, Hilton, Peavey Session 500, Mackie SM450's |
|
|
|
Paul Sutherland
From:
Placerville, California
|
Posted 17 Feb 2011 5:13 pm
|
|
| Got it. Everything seems to be working. Thanks! |
|
|
|
Steven Cummings
From:
Texas
|
Posted 18 Feb 2011 4:19 am Spreadsheet
|
|
I've just sent you an email. Thanks for sharing!
It's folks like you that make this such a great site.
_________________
Lookin' on the sunny side.... |
|
|
|
