pedal steel

Gordon Sharp · From: Kingston, Tennessee

Need info on my Emmons steel,what year was model 1104 made thanks. Gordon Sharp Kingston Tenn.

Doug Ferguson · From: Burnet, Texas, USA

Don't know if you can edit your topic, but if you make it more specific to your question, I think you might get an answer. Hope it helps! Smile

Good luck.
_________________
Fergy, MSA Classic D12, MSA Classic S10, Peavey Session 500

Paul Norman · From: Washington, North Carolina, USA

If it is a s10 Ihave 1204s which is a 1971. Call
Emmons Lashley and they can tell you. But it is about 70 or 71. The D10 numbers may not run the same.

Gordon Sharp · From: Kingston, Tennessee

Thanks a lot guys,the guitar is a double neck. Gordon Sharp Kingston Tenn.

Bill Lowe · From: Connecticut

http://bb.steelguitarforum.com/viewtopic.php?t=199036&highlight=serial
_________________
JCH D10, 71 D10 P/p fat back, Telonics TCA 500C--12-,Fender JBL Twin, Josh Swift signature.

Bud Musgrave · From: Carmi, Illinois, USA

I have a similar question about the serial numbers
my D 10 has an 2112 stamped, with no letter D,circa 1975 the control pot is stamped with # 1347315 can someone explain why no letter D on some D10's and could my steel be a 73 instead of 1975.Thanx

Gordon Sharp · From: Kingston, Tennessee

Looking at the serial numbers must be a 66. Gordon Sharp Kingston Tenn.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: