| Author |
Topic: Dekley or old MSA undercarriage parts |
Thiel Hatt
From:
Utah, USA
|
Posted 7 Jan 2011 2:19 pm |
|
| I recently acquired a Dekley Guitar and want to add to the under-carriage, but have encountered a problem finding some bell-cranks (rod pullers)(pull fingers). The cross shafts are 3/8 " diameter and are the round shafts. Brass inserts, with set screws, fit into the bell cranks to secure the pull rods. I need both, the bell cranks and the brass inserts. Do any of you know where some might be laying around I can buy? (14 each) |
|
|
 |
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 7 Jan 2011 2:36 pm
|
|
Tom Bradshaw. 
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Darvin Willhoite
From:
Roxton, Tx. USA
|
Posted 7 Jan 2011 7:49 pm
|
|
Or Jim Palenscar.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro. |
|
|
|
