| Author |
Topic: Zane Beck Custom Double Neck NOT MINE ! Opinion on Value ? |
Larry Campbell
From:
Arkansas, USA
|
Posted 17 Nov 2010 6:48 am |
|
Newbie here. Though I just purchased a cheap lap steel from auction site, I am intrigued by a Zane Beck Custom that I found ,Two necks,2 knee levers and 8 pedals. Can anyone ball park a price for me. and any other info ? Thanks 
 [/b]
Last edited by Larry Campbell on 17 Nov 2010 7:53 pm; edited 3 times in total |
|
|
 |
Papa Joe Pollick
From:
Swanton, Ohio
|
Posted 17 Nov 2010 8:01 am
|
|
I have no idea what the true market value might be but I do believe that I'd swap my front seat in hell for that sweetheart..  |
|
|
|
Ben Elder
From:
La Crescenta, California, USA
|
Posted 17 Nov 2010 9:29 am
|
|
Recent examples are in the mid-teens (I know from wistful experience as a seller of a D-11) unless they're in finely-tuned playing condition (fat chance if they haven't been actively played and maintained. Mine was in decent playing condition, actually.) They need expert hands to get them right and someone will eventually want at least two more knee levers, so figure on spending at least low-to-high hundreds getting it serviceable. Not to exclude several psgeniuses hereabouts, but the ranking wizards for old ZBs here on the Forum are B Greg Jones, Kevin Hatton and Billy Knowles.
_________________
"Gopher, Everett?" |
|
|
|
Dennis Wallis
From:
Arkansas
|
Posted 17 Nov 2010 3:13 pm
|
|
P M sent .  |
|
|
|
Dave Simonis
From:
Stevens Point, WI USA
|
Posted 17 Nov 2010 5:14 pm
|
|
According to EBAY...this same steel is worth $810 as of right now...are you seller and selling it here too?
_________________
Dave Simonis
Fiddle: Zeta, Arthur Conner, many others.../Steel: GFI SD-10 Ultra.../Mandolin: Breedlove.../Guitar: Gibson, Fender, Taylor.../Amps: Peavey NV112, Evans FET 500.../Others: Hilton, Goodrich, Stereo Steel, Pendulum Pre-amp... |
|
|
|
Larry Campbell
From:
Arkansas, USA
|
Posted 17 Nov 2010 7:48 pm
|
|
Sorry for the confusion No I am not the seller. I was trying to find out opinions on price !
Thanks |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 17 Nov 2010 8:19 pm
|
|
$1250 tops. It needs two more knee levers and undoubtably a setup. Never saw a used one that didn't go through a ZB mechanic that played properly.
Once they are set up properly they play great. Key word is "properly". I've seen many that were messed up. |
|
|
|
Brendan Mitchell
From:
Melbourne Australia
|
Posted 18 Nov 2010 10:23 am
|
|
| If you are interested in ZB take a wade through this post :http://bb.steelguitarforum.com/viewtopic.php?t=35915&highlight=help |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
