| Author |
Topic: ZB wiring |
Jimmy Gibson
From:
Cornwall, England
|
Posted 7 Oct 2010 10:33 am |
|
Could any of you nice people  help me out with a wiring diagram for a SD10 ZB 3 coil pickup please,i would be very gratefull.Thanks.
Jimmy..G.. |
|
|
 |
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 7 Oct 2010 1:53 pm
|
|
| Jimmy, its easy. There are 4 wires from the pickup. Pickup black wire to ground on the input jack. 3 coil wires from pickup to the 3 terminals on the switch. 1 positive wire from the positive terminal on the switch to the positive on the input jack. |
|
|
|
Jimmy Gibson
From:
Cornwall, England
|
Posted 10 Oct 2010 3:17 am Kevin
|
|
Hi Kevin,please is there any chance you could let me have a diagram,i tried what you so kindly posted but i can still only get the first two coils to work on the switch,from right position bright to centre warmer,but nothing on the third coil,and i would like to try and get all three coils to work if i can,but thanks once again for trying to help.
Jimmy.. |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 10 Oct 2010 5:42 pm
|
|
| Jimmy, there are 4 terminals on the switch. 3 are taps, 1 is a postive. Make sure that you don't have 1 pickup wire connected to the positive on the switch. You have to run a posi wire from that posi switch terminal to the posi on the input jack. |
|
|
|
