| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Jazzmaster Pickup for Lap Steel?
Reply to topic
Author Topic:  Jazzmaster Pickup for Lap Steel?
Gary Meixner

 

From:
New York, USA
Post  Posted 1 Oct 2010 6:32 am    
Reply with quote

I am building a new lap steel and the design requires a thin, surface mounted pickup. Has anyone used or heard a Jazzmaster pickup on a lap steel guitar? Any other suggestions would be welcome as well. I play mostly Hawaiian, old country and Western Swing and use a standard C6 tuning.

Thank you,

Gary
View user's profile Send private message Send e-mail
Brad Bechtel


From:
San Francisco, CA
Post  Posted 1 Oct 2010 8:39 am    
Reply with quote

I don't recall anybody specifically using a Jazzmaster pickup on a lap steel before.

Here's an article about these pickups by Jason Lollar, who I'd recommend for such work.
_________________
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars
View user's profile Send private message Send e-mail Visit poster's website
Tom Pettingill


From:
California, USA (deceased)
Post  Posted 1 Oct 2010 8:42 am    
Reply with quote

A Jazzmaster pickup should sound very good on a steel. It's basically a P90 shaped coil with mag pole pieces, very similar to early Gibson Console Grand pickup designs.
_________________
Some misc pics of my hand crafted steels
Follow me on Facebook here
View user's profile Send private message Send e-mail
Benjamin Franz

 

From:
Melbourne, Victoria, Australia
Post  Posted 1 Oct 2010 5:14 pm    
Reply with quote

The Jazzmaster style pick up was used on the early model Fender 400 pedal steels. I've just taken the jazzmaster pickup off mine to experiment with a pair of stringmaster pick ups.
View user's profile Send private message Send e-mail
Nathan Sarver


From:
Washington State, USA
Post  Posted 1 Oct 2010 5:24 pm    
Reply with quote

They sound phenomenal on the old Fender 1000 and 400 pedal steels. I don't see why there would be a problem using them for non-pedal steel.

b0b made a nice recording on both necks of his Fender 1000 here:

http://soundhost.net/b0b/Fender1000demo.mp3
View user's profile Send private message Send e-mail
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 1 Oct 2010 5:43 pm    
Reply with quote

How did the experiment go Benjamin? I've been thinking about trying Lollar Stringmaster replcements on a Fender 1000.
Dave
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail
Benjamin Franz

 

From:
Melbourne, Victoria, Australia
Post  Posted 1 Oct 2010 6:36 pm    
Reply with quote

Hey Dave, I've got the 400 in at a shop to do some routing to accommodate the pickups, and will have it back sometime next week, so I'll be sure to let you know. I've been trying out a lace alumitone p90, which was pretty good, though very thick sounding. My goal is to make my 400 sound like my stringmaster. I know they won't sound exactly alike, due to the two different steels have different acoustic sounds, but, I'm hoping it'll be in the ballpark.
The only reason I didn't stick with the jazzmaster pickup, is that despite all my efforts at shielding, it's just too noisy too be useful.
View user's profile Send private message Send e-mail
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 1 Oct 2010 6:57 pm    
Reply with quote

I think some of the tone difference has to do with that metal plate and the changer on the 400. It seems to almost act a resonator. My 400 is the loudest steel I have when played acoustically. I have to say that as much as I love the sound of my Fender pedal steels (400, 1000, 2000) My little Fender Deluxe 6 and my Stringmaster have them beat for tone (by a hair Smile )
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail
Benjamin Franz

 

From:
Melbourne, Victoria, Australia
Post  Posted 1 Oct 2010 7:30 pm    
Reply with quote

I agree. I also think a big difference is the fact that on a stringmaster, the ball end of the strings sit in the metal plate, which increases the resonance, as opposed to sitting in the hog rings on the 400, which I guess acoustically decouples them from the body. Acoustically my stringmaster has a much sweeter sound with more bottom end, but like you noticed, quieter than the 400.
View user's profile Send private message Send e-mail
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 1 Oct 2010 8:19 pm    
Reply with quote

Quote:
I also think a big difference is the fact that on a stringmaster, the ball end of the strings sit in the metal plate, which increases the resonance, as opposed to sitting in the hog rings


Imagine a Stringmaster with pedals with a changer/tuner BEHIND the nut and the ball end touching the plate........... Whoa!
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail
Benjamin Franz

 

From:
Melbourne, Victoria, Australia
Post  Posted 2 Oct 2010 4:34 am    
Reply with quote

Amen. That would be my dream instrument!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron