Author |
Topic: changing knee levers |
Bob Moore
From: N. Rose, New York
|
Posted 21 Sep 2010 5:20 am
|
|
I just got a 06 Fessy and the vertical and left knee left got switched by previous owner. Not person I recieved it from. What tools would I need to swap the levers back to original place. Any suggestion or someone in Upstate NY that i can take it to. Thanks Bob |
|
|
|
Ryan Barwin
From: Hamilton, Ontario, Canada
|
Posted 21 Sep 2010 6:42 am
|
|
Do you mean that the function of the levers was switched, or the actual levers were physically moved? Either way, it shouldn't be too hard to fix... _________________ www.pedalsteel.ca |
|
|
|
Bob Moore
From: N. Rose, New York
|
Posted 21 Sep 2010 9:44 am
|
|
Ryan It looks like the levers were switched. Now the vertical has to be pulled in order to work. The one knee is to close to the other one to be of use. Thanks for your reply. Bob |
|
|
|
Ryan Barwin
From: Hamilton, Ontario, Canada
|
Posted 21 Sep 2010 11:07 am
|
|
Could you post a photo of those parts on the undercarriage? _________________ www.pedalsteel.ca |
|
|
|
Bob Moore
From: N. Rose, New York
|
Posted 21 Sep 2010 11:55 am
|
|
I have trouble posting pics. I can email them. I think they need to be resized to be posted. Bob |
|
|
|
Dennis Wireman
From: North West Indiana 47978
|
Posted 21 Sep 2010 12:01 pm pics
|
|
here are a couple pics for
|
|
|
|
Bob Moore
From: N. Rose, New York
|
Posted 22 Sep 2010 10:37 am Problem solved
|
|
Guys after some detective work I found the problem. The set screw worked it way out so I could not put the lever in proper position. I adjusted the pin and the lever went into proper place. The vertical lever needs the same adj screw to lower it to playing place. Now the lever goes to high for playing. Anyone know where I can get one. It goes into the lever where it bents for adj. Thanks for everyone who had input. It made me go looking futher. Bob |
|
|
|
Bob Moore
From: N. Rose, New York
|
Posted 22 Sep 2010 2:52 pm
|
|
Please close problem solved. |
|
|
|