Franklin Volume pedal mount question

Matthew Knapp · From: Brooklyn, USA

Hey guys. I got this Franklin stereo Volume pedal from a fellow forum member and now I have to figure out how to mount it to my Emmons. The pedal looks like it could be a "drop pin" style if I had some additional parts maybe? Any body have one that looks like this mounted to an emmons?

Thanks

Philip Mitrakos · From: The Beach South East Florida

looks like those little feet are spring loaded ...

Ron Lykins · From: Willard,Oh USA

I have the same pedal.If your pedal bar doesn't have a hole in it and two pieces of metal to set the VP on
then you have two choices.Drill a hole in the pedal and call Emmons Guitar Co and get the two small strips of metal or they might make a bracket to sit on your pedal bar that will except your VP.This is a very good pedal and I have had mine for 20+yrs.If it were me I would send the pedal bar to one of the steel manufactures and let them do it.

Matthew Knapp · From: Brooklyn, USA

Thanks for the suggestions guys but I'm still not sure I know what to do. I also have a "fixed pin" style franklin volume ped that works great with my emmons, which btw does have a hole in the pedal bar, but its clear that my 2nd franklin is built differently. I'm gonna add some pics for clarification.

The pedal in question (I removed a plate from the front which may or may not be helping the situation):

Compared with my other Franklin, a fixed pin:

The 2 side by side. See the difference? The one without the front pin is whats confusing me.

Ron Lykins · From: Willard,Oh USA

I'm not sure what to tell you.I have only owned one Franklin pedal.I would suggest calling Paul Franklin and I sure he would answer all your questions.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: