Author |
Topic: Pull Rods and Parts, Hex Tuners, Etc. Shop Online? |
Tim Heidner
From: Groves, TX
|
Posted 21 Jul 2010 12:05 pm
|
|
Who sells this stuff online?
Last edited by Tim Heidner on 21 Jul 2010 4:40 pm; edited 1 time in total |
|
|
|
Tim Heidner
From: Groves, TX
|
Posted 21 Jul 2010 4:38 pm
|
|
Well, I went to couple big box places and they didn't have anything.
What I need is some parts to put a few compensators on, 7/64 pull rods, clips and nylon hex nuts.
Is there a place online I can get this stuff? I see George L has the hex nuts but not the other stuff...
Last edited by Tim Heidner on 21 Jul 2010 6:07 pm; edited 1 time in total |
|
|
|
Marvin Born
From: Ohio, USA
|
Posted 21 Jul 2010 5:25 pm
|
|
I would just order the parts from the manufacturer of the guitar, if they are still in business. I have ordered parts from Emmons and Zum with no problems.
Also you can try Mike Cass or Steel Guitar Nashville among other big repair shops. I suggest you post the brand of your instrument and exactly what parts you need including the length of the rods and see what happens.
Marvin |
|
|
|
Stu Schulman
From: Ulster Park New Yawk (deceased)
|
Posted 21 Jul 2010 7:23 pm
|
|
Tim,I would try Jeff Surratt at Show-pro guitars for the clips http://www.showprosteelguitars.com/index
Check to see if there are any welding shops close to you who can make rods or call Chuck Back for those. _________________ Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|