| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Humidity Range for Musical Equipment?
Reply to topic
Author Topic:  Humidity Range for Musical Equipment?
Allan Jirik


From:
Wichita Falls TX
Post  Posted 17 Jun 2010 8:28 am    
Reply with quote

I'm considering setting up a music room in the basement, in a 12x12 area that I've carpeted and added temporary walls. It's cool down there but not clammy. I'm going to measure the indoor humidity, but need to know what the tolerable range is for musical instruments both electric and acoustic. I guess I could add a dehumidifier if necessary. Thanks for the input.
View user's profile Send private message Send e-mail
Jim Hollingsworth

 

From:
Way out West
Post  Posted 17 Jun 2010 8:37 am    
Reply with quote

You can ask the folks in Nashville ..... 100% is NOT within the allowable range.
View user's profile Send private message Send e-mail
John Ummel


From:
Arlington, WA.
Post  Posted 17 Jun 2010 9:40 am    
Reply with quote

Hi Allan,
Good question.
Too dry is often the bigger problem. Thats why they sell humidifiers like the "Dampit" for guitars and other wooden instruments.
http://www.maurysmusic.com/humidity___acoustic_guitars
View user's profile Send private message
Jim Cinney


From:
Tehachapi California, USA
Post  Posted 17 Jun 2010 10:11 am    
Reply with quote

Hi Allan, I have several acoustic guitars as well as electric and a pedal steel.I try to keep the relative humidity in my room to 40%..Here in so cal it is like a desert.and with ac on in the summer and the forced air heat in the winter humidity can drop to single digits.as stated before, too dry is bad!!! things will crack.!!!!!!.anything over 60 % creates other problems,I try to keep between those numbers.
good luck.
View user's profile Send private message Send e-mail Visit poster's website
Jesse Leite


From:
Ontario, Canada
Post  Posted 17 Jun 2010 10:35 am    
Reply with quote

I've been told 40% to 60% relative humidity is ideal for instruments (especially acoustic guitars as they are build with thin tops and sides, so fluctuation can make a big difference throughout the life of the instrument). Anything dryer than 40% can be dangerous (I had a Takamine crack, and a neck twist; both of which I suspect happened because of dryness). Anything over 60% to 70% and you are getting into mildew territory I think.
_________________
Playing an '81 BMI SD-10 4&6 through a Peavey Delta Blues 2x10 all-tube amp.
E9 Fretboard Reference Booklet (Chords & Scales PDF)
View user's profile Send private message Send e-mail Visit poster's website
Max W. Thompson

 

From:
Texas, USA
Post  Posted 18 Jun 2010 9:16 am    
Reply with quote

Our part of the country is very humid, so that can be a real problem here. My instruments are in a little building that was way too wet, on the verge of mildew. I finally broke down several years ago and got a de-humidifier and maintain 50-60% humidity all the time. Everything is much happier, and trust me, a 50% humidity guitar sounds much better that an 80-90% humidity guitar.
View user's profile Send private message Send e-mail
Allan Jirik


From:
Wichita Falls TX
Post  Posted 18 Jun 2010 1:43 pm    
Reply with quote

I've got a humidifier on the furnace that has summer and winter settings so I guess I don't have to worry about it too much. There were pics posted recently of a couple steels that looked like they were pulled out of a swamp... I just don't want mine to end up like that! I can't help the sour notes I produce but I CAN keep the guitar in good shape.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron