| Author |
Topic: old Ernie Ball Volume Pedal (jacks on 1 side), needs pot |
Justin Douglas
From:
Austin, TX
|
Posted 16 Feb 2010 2:58 pm |
|
I've got a great looking older Ernie Ball volume pedal up for grabs. It's got the in and out jacks on the right side, and has that extra taper knob there too.
It's in fine shape as you can see, but it doesn't work. Signal passes right through, moving the pedal just makes a crackle. Could need one pot, could need two, I don't know. But the pedal feels great and looks almost as sharp as that new hickory floor I just put in!
Say, $40 + shipping (my zip is 78666 if you want to calculate it). Paypal is fine.
Thanks!!!!
 [/img] |
|
|
 |
Justin Douglas
From:
Austin, TX
|
Posted 17 Feb 2010 7:46 am
|
|
sold and sold, closer 'er up, donation coming.
thanks! |
|
|
|
Jimmy Walls
From:
Phoenix , Arizona
|
Posted 19 Feb 2010 9:13 am EB string kit
|
|
Justin, I can't seem to find the string kit for these older volume pedals. Kits for the smaller pedal are on EB website. Do you know who might have one they would part with. My pedal is mono. Jimmy Walls
_________________
Mullen SD-10 3x5 Peavey-1000, Vegas 400, Nashville 112, DD3, Keith Hilton Digital Sustain |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
Posted 19 Feb 2010 9:39 am EB String Kit
|
|
Jimmy I just got one from EB. Notice the part# below:
P06157
Also note, the shipping and handling was more then the cost of the kit. |
|
|
|
Jimmy Walls
From:
Phoenix , Arizona
|
Posted 19 Feb 2010 11:59 am EB String Kit
|
|
Dick, Thanks to your info I went back to the web site and dug around, sure enough there it was!! Someday I'll get this point and click computer stuff. Jimmy
_________________
Mullen SD-10 3x5 Peavey-1000, Vegas 400, Nashville 112, DD3, Keith Hilton Digital Sustain |
|
|
|
