| Author |
Topic: My Printed Wood Veneer Fretboards Survey? |
Dennis Brooker
From:
Iowa, USA
|
Posted 15 Feb 2010 12:42 pm |
|
I don't know how to do a poll so please just let me know on the forum or email me directly at dbrooker@dbrooker.com - I've lost more than a few orders for my printed veneer fretboards because I can only print on 18" material with a 17" image - I'm considering purchasing a new laser printer that will enable me to print on 48" material with a 47" image area which should handle most fretboards -
I'm not asking for orders but I'm asking that if you were considering a new fretboard purchase would that make you more likley to order a printed wood veneer fretboard now that I can print most any length with any number of frets?
Thanks in advance for your comments - DB |
|
|
 |
Jason Hull
|
Posted 15 Feb 2010 1:46 pm
|
|
| I think it would be wise to be able to make larger prints. I think your boards look great, but you can't print a 2 octave board for >24" scale lengths, which are pretty standard. I wouldn't want a board with only 21 frets. |
|
|
|
Dennis Brooker
From:
Iowa, USA
|
Posted 15 Feb 2010 2:48 pm
|
|
| Jason Hull wrote: |
| I think it would be wise to be able to make larger prints. I think your boards look great, but you can't print a 2 octave board for >24" scale lengths, which are pretty standard. I wouldn't want a board with only 21 frets. |
Jason - Yes, if I buy the new printer - That's why I'm asking the question to try and determine if there's enough interset before I spend the money on the new printer - Thanks for your comment - DB |
|
|
|
norm mcdaniel
From:
waco tx
|
Posted 16 Feb 2010 3:31 am
|
|
Yes Dennis Id buy more from you if you could print a 24 or 25 inch f-board. Have used some of your shorter ones and I like them fine
Ole Norm in Waco |
|
|
|
Brad Bechtel
From:
San Francisco, CA
|
Posted 16 Feb 2010 7:37 am
|
|
I don't personally have a new for a new fretboard. Have you considered seeing whether a parts supplier like Stewart-Macdonald would consider carrying such an item?
_________________
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars |
|
|
|
Dennis Brooker
From:
Iowa, USA
|
Posted 16 Feb 2010 7:43 am
|
|
| Brad Bechtel wrote: |
| I don't personally have a new for a new fretboard. Have you considered seeing whether a parts supplier like Stewart-Macdonald would consider carrying such an item? |
Brad - No, but that's a good Idea that I will look in to - Thanks - DB |
|
|
|
