Steel Driver II switching drop out question

Cliff Kane · From: the late great golden state

Hi folks,
I've got a Goodrich Steel Driver II. Both modes sound great, but on my unit there is a brief (about 1/2 of a second) drop out of signal when switching from the buffer side to the distortion side. This doesn't happen when switching from the distortion side to the buffer side, but when going from buffer to distortion the signal drops out. It almost sounds like a compressor ramping up very quickly. I am just curious if there is a way to modify the pedal so that the switching is instantaneous. Is it the type of switch, or the switching circuitry that does this?

Thanks,
Cliff

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: