| Author |
Topic: ADA Micro Tube 200 ON/OFF Switch |
Don Sulesky
From:
Citrus County, FL, Orig. from MA & NH
|
Posted 18 Sep 2009 6:22 am |
|
Can anyone lead me to where I can replace my ADA switch. It is a rocker type with a red on light, but is not needed.
It works intermittanly now and I need a new one.
Otherwised the unit is in perfect running condition.
I have the schematic and have removed the switch.
It says it's a GHILY 3022 a 125VAC switch.
I have been told by a freind of my it is a SPST type about 1/2 x .7 by my measurements.
Thanks for any help.
Don |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 18 Sep 2009 7:44 am
|
|
www.partsexpress.com has a good selection of rocker switches at reasonable prices. You can probably match up the size and type you need.
FWIW, I found one to fit my MosValve amp at my local Ace Hdwe. store. |
|
|
|
Don Sulesky
From:
Citrus County, FL, Orig. from MA & NH
|
Posted 18 Sep 2009 7:49 am
|
|
Jerry
Thanks
I have ordered from them before.
I think I may have found one that might work.
I'll have my electric friend take a look at the page I found.
Ace Hadrware was my next idea.
I may check them out 1st as they are just down the road where I play each week.
Don |
|
|
|
Don Sulesky
From:
Citrus County, FL, Orig. from MA & NH
|
Posted 18 Sep 2009 8:25 am
|
|
Jerry
None of them will fit.
I'll keep searching
Thanks
Don |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 18 Sep 2009 9:08 am
|
|
| Sorry, Don. I expect Mouser or Allied will have what you need, but they don't show size or mounting hole requirements, specs. Just browse the web, I guess. I've been through this same thing for my gear. Good Luck. |
|
|
|
Don Sulesky
From:
Citrus County, FL, Orig. from MA & NH
|
Posted 19 Sep 2009 3:36 am
|
|
My friend Blake Hawkins found a switch that will work for me on the DigiKey site.
Thanks
Don |
|
|
|
