Author |
Topic: Dekley S10 w/pedal |
Lonnie Zsigray
From: Saint Louis,Mich., USA
|
Posted 7 Sep 2009 5:22 pm
|
|
I have a mid 80's Dekley S10 with pedal and case for sale.Guitar is in very good condition.Case has seen better days although it is solid.I am getting a new guitar and can't keep both.I will be glad to answer any questions about the steel.This is a 3 & 4 with Emmons pedals and Shobud lever setup.Asking 1400.00 plus shipping within US.It weighs about 65lbs.in the case.
_________________ If I hear it,I'm gonna try to steel it |
|
|
|
Lonnie Zsigray
From: Saint Louis,Mich., USA
|
Posted 8 Sep 2009 2:29 am Dekley
|
|
TTT _________________ If I hear it,I'm gonna try to steel it |
|
|
|
Paul Foster
From: Arizona, USA
|
Posted 9 Sep 2009 3:45 pm Dekley
|
|
HI
I realize that this is not an easy question to answer, but could you describe the pedal action, I am looking for a steel that has a fairly short throw and thats very easy to push down I have a bad left foot Thanks, any other information that might be helpful would be graeatly appreciated |
|
|
|
Lonnie Zsigray
From: Saint Louis,Mich., USA
|
Posted 10 Sep 2009 2:05 am Dekley
|
|
Hi there.This guitar has three different holes in the bell cranks to put the rods into to change the effort/throw you are asking about.It is not one that is real easy to pedal.No sock feet here.I have it set to be the easiest at this time but compared to say,a Mullen,it takes considerably more effort. _________________ If I hear it,I'm gonna try to steel it |
|
|
|
Lonnie Zsigray
From: Saint Louis,Mich., USA
|
Posted 17 Sep 2009 2:17 pm Dekley
|
|
Still available. _________________ If I hear it,I'm gonna try to steel it |
|
|
|