| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Peavey Classic 50 212 - for steel?
Reply to topic
Author Topic:  Peavey Classic 50 212 - for steel?
Tim Whitlock


From:
Colorado, USA
Post  Posted 1 Sep 2009 2:19 pm    
Reply with quote

There's a Peavey Classic 50 212 available locally for a super low price. Thought it might make a suitable backup for my Twin and I have extra 15" JBL or Weber speakers I can install if the stock speakers are questionable.

I'm a little uncertain about a 4 x EL84 amp. I always think EL84 = Marshall = CRUNCH, but I know EL 84's are also used in some high end stereo hi-fi amps.

Anybody have a first hand opinion about the sound of this amp for steel? I fear 50 watts may leave me twisting in the wind. Does it have enough headroom for your typical bar gig?
View user's profile Send private message Send e-mail
John Gould


From:
Houston, TX Now in Cleveland TX
Post  Posted 1 Sep 2009 2:45 pm    
Reply with quote

I've used a Classic 50 4X10 several times on gigs and had plenty of headroom.
_________________
A couple of guitars
Fender GTX 100 Fender Mustang III Fender Blues Jr. Boss Katana MKII 50
Justice Pro Lite and Sho Bud Pro II
View user's profile Send private message Send e-mail
David Doggett


From:
Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
Post  Posted 1 Sep 2009 4:26 pm    
Reply with quote

Assuming it sounds similar to the Classic 30 1x12, be prepared for a guitar amp that sounds very bright for pedal steel, and breaks up somewhere in the top half of its volume range - not at all like a clean-to-the-top silver-face Twin. You can dial the treble down and bass up, but that just makes it break up even sooner. It'll be a far cry from your Twin, but only you can say if it has enough clean volume for some purposes.
View user's profile Send private message Send e-mail
Leslie Ehrlich


From:
Saskatoon, Saskatchewan, Canada
Post  Posted 1 Sep 2009 7:13 pm     Re: Peavey Classic 50 212 - for steel?
Reply with quote

Tim Whitlock wrote:
There's a Peavey Classic 50 212 ...I'm a little uncertain about a 4 x EL84 amp. I always think EL84 = Marshall = CRUNCH,


If this is the all-tube 'tweed' Peavey Classic 212 it does not sound like a Marshall at all. I tried one of these amps out and it sounds more like a Vox AC30 to me. The distortion is smooth and fine-grained just like the Chinese made Vox master volume AC30s.
_________________
Sho-Bud Pro III + Marshall JMP 2204 half stack = good grind!
View user's profile Send private message Send e-mail
David Mason


From:
Cambridge, MD, USA
Post  Posted 2 Sep 2009 4:49 am    
Reply with quote

I think you'd love it, albeit with different speakers. I've never compared a Twin to a Classic 50 directly for cleaniness at volume, but the Classic is every bit as loud into the same speakers. Unless you're running your Twin at "10", it should be fine.
View user's profile Send private message Send e-mail
Bobby Burns

 

From:
Tennessee, USA
Post  Posted 2 Sep 2009 4:59 am    
Reply with quote

I had a classic 50 212 for a while. I played steel through it some. It was a great amp, but it was bright with a steel. Different speakers would have maybe helped, but I never tried any. I was playing as much Tele as I was push-pull in the band I used it in, and I just wanted to carry one amp. I liked it way better on the tele.
I actually like my old Bandit 65 better as a dual purpose amp.
View user's profile Send private message Send e-mail
Bob Kagy

 

From:
Lafayette, CO USA
Post  Posted 4 Sep 2009 1:24 pm    
Reply with quote

I found that it broke up very quickly on the C6th neck even at low volumes.
View user's profile Send private message Send e-mail
John Bechtel


From:
Nashville, Tennessee, R.I.P.
Post  Posted 4 Sep 2009 7:09 pm    
Reply with quote

I owned a Classic 50 212 for a while. To me it had a satisfactory sound for PSG, but; I couldn't put up with being at home and in the same room with that Amp and it's audible internal cooling-fan. So, I traded it away on a ’65 RI Fender Twin~Reverb Custom™ 15. Much better results!
_________________
<marquee> Go~Daddy~Go, (No), Go, It's your Break Time</marquee> L8R, jb
My T-10 Remington Steelmaster
View user's profile Send private message Send e-mail
Jerry Hayes


From:
Virginia Beach, Va.
Post  Posted 5 Sep 2009 4:58 am    
Reply with quote

Tim, I don't know whether you play out or not but if you do play in a band situation you'd have to be miked at most gigs to get a good steel sound out front with one of these. Fifty watts is great for lead guitar but just won't cut it for all 'round gigging on steel as they break up too soon.....JH in Va.
_________________
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron