MSA Classic S 10 3p 3k price lowered

gary darr · From: Somewhere out in Texas

I am posting this steel for a friend whom's
father passed away. I would purchase it myself if I had the $$$$ but I told her I bet I could find a buyer for it on the forum. As of yet all I know about this steel is based on a single picture that she gave me. The best I can tell that its a woodgrain mica single 10 with 3 pedals and 3 knees. If anyone might be interested
she is asking $850 plus shipping, if you could throw in a extra $10 that would be appreciated on my part to pay for the gas to drive out to pick up the steel thanks Gary

------------------
Fessenden S-10 3P and 5K Session 500,American standard Strat,Shecter tele,Peavy Classic 50

gary darr · From: Somewhere out in Texas

Update, I have had a chance to get out to see that MSA since my first post.
It is a one owner steel, only has been played at home or at church.
Upon playing it, I found it amazingly in tune and set up to have not been played in nine months, the mechanics all worked smooth
with no issues I could find.
The woood grain mica is all intact with no chips and looks good, on the back side of the body there is a small scuff on the aluminim maybe from a belt buckle or possibly where it might rub in the case, it allso has a volume and tone pot on the back side. The body has a around a 2 inch lip on the back side of the neck that a narrow pad could be installed if desired. The legs do have some light scrathes on the chrome and the pedal bar looked as if it could use some cleaning up. I did snap a few digital Pics I can email you if you are interested thanks Gary

------------------
Fessenden S-10 3P and 5K Session 500,American standard Strat,Shecter tele,Peavy Classic 50

Charles Tilley · Posted 29 Oct 2006 6:47 am

I have been in contact with Gary about this guitar and he has gone to some effort to get the information above. One thing he forgot to mention is that the case is molded plastic with the foam on the inside deterioated and gone. This is an issue that all should know because a new case would be required. I have sent an offer to Gary but someone may go higher. That's OK too, but remember the case when you do.

Just mt 2 cents worth.

[This message was edited by Charles Tilley on 29 October 2006 at 06:51 AM.]

gary darr · From: Somewhere out in Texas

Its been a while since this origionaly posted but I happend to run into the Lady that has this steel and it is still available, she told me that she would consider $700 plus cost of shipping. I found the pics that I had taken back then and would be glad to forward them to any interested individuals thanks Gary

Ronald Robertson · From: Alabama, USA

please forward pics to ronnie-robertson@att.net asap

Loren Bayles · From: Iowa, USA * R.I.P.

Hello Gary,

I'll take the MSA with the case that needs relined
if the lady will accept my offer I send you by email.

Thanks.

Loren

Del Walters · From: Milford,Texas, USA

Please send me pics, at delwaltersdvm@earthlink.net, if the steel has not sold. Thanks Doc
_________________
Rittenberry SD 12 Lacquer, Rittenberry SD 12, Mullen G2 Del Mullen Signature SD-12, "Fox Vintage Amp and vintage reverb",Steel Mixer, "BJS Bars" , Sanberg 7 string bass, Fender tele-#4,Strats-#1,Fender V USA bass#2 Gibson 335, etc, etc, 1 fully staffed and equip veterinary hospital,plus 5 Yorkies, and a tolerate 100 pound Rottweiler.

K.J. Tucker · From: Texas

P.M. Sent
_________________
In Memory of My Friend http://rickalexander.com/BigSteel/

If you can read this Thank a Teacher , If it is in English Thank a Soldier !

Luck is preparation meets opportunity............ My Grandmother

Mike Kirkland · From: Texas, USA

if this is still for sale, please send some pics.i am interested in the steele.

gary darr · From: Somewhere out in Texas

Please lock er up

Forum Index > For Sale: Steel Guitars		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: