| Author |
Topic: ??? for Ken Fox - Session 400 Ltd. |
Nic du Toit
From:
Milnerton, Cape, South Africa
|
Posted 28 May 2009 3:20 am |
|
This amp is fitted with a horrible spring reverb system......Horrible sounding to me, anyway. This amp belongs to a friend of mine, and he was complaining of a slightly distorted sound when used at fairly high volume level at gigs. I said that I would look it over , and maybe send it for repairs if it's anything other than perhaps a loose connection. What I found was that one of the springs in the reverb unit broke, causing some unwanted noise at higher output level. I re-soldered the spring, and things seem to be fine, now. (Until a next time....)
My question is: what would you suggest I do to take the unit totally out of the pre-amp circuit?
Your comments will be appreciated.
Regards,
Nic |
|
|
 |
Ken Fox
From:
Nashville GA USA
|
Posted 28 May 2009 3:23 am
|
|
| I would put in a new 3 spring tank, do the Metzger reverb mod and then he would have a fine sounding reverb. |
|
|
|
Nic du Toit
From:
Milnerton, Cape, South Africa
|
Posted 28 May 2009 3:35 am
|
|
Thanks, Ken.
I'll inform my buddy, and let him decide. |
|
|
|
Nic du Toit
From:
Milnerton, Cape, South Africa
|
Posted 28 May 2009 3:40 am
|
|
Thanks, Ken.
I'll inform my buddy, and let him decide. |
|
|
|
