| Author |
Topic: Goodrich 120 |
Lee Holeman
From:
San Benito, Texas, USA
|
Posted 24 May 2009 7:46 pm |
|
I'm having troubles with my volume pedal. Started out--different tone and quality between 2 outlets to amps--one bright and the other more mellow, (then today they SWITCHED!!! I replaced with an old Ernie Ball pedal, and everything was back to normal. Any ideas what's going on? I'm playing thru an AER 60, and have never had any problem with it. Any help?
Lee Holeman |
|
|
 |
Bob Hickish
From:
Port Ludlow, Washington, USA, R.I.P.
|
Posted 25 May 2009 6:00 am
|
|
Lee
The 120 is a very straight forward pedal - in the
past i have had this happen , then discovered i had
plugged in the cables in reverse - maybe check your
connections .
Hick |
|
|
|
Lee Holeman
From:
San Benito, Texas, USA
|
Posted 25 May 2009 8:59 am Goodrich 120
|
|
Thanks Bob--yea I've checked my wiring over and over. It's really blowing my mind. I'll try to get in touch with Goodrich.
Lee |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 25 May 2009 9:23 am
|
|
| Have you removed the bottom plate on the pedal and looked at the wiring? Perhaps you've got some spider webs or a nest of ants living in there. I'm thinking there must be some foreign object in the pedal causing the problem. The way those pedals are wired, there's no other reason why one output would be different from the other output. |
|
|
|
Lee Holeman
From:
San Benito, Texas, USA
|
Posted 25 May 2009 10:00 am Goodrich 120
|
|
Hi Lee,
Yea I've tried everything I know. The inputs/outputs are all three sealed, and I can find no problems. I'm gonna call Goodrich tomorrow and see if they can help me. Thank goodness I had my old Ernie Ball standby with me yesterday at Pepe's.
Lee |
|
|
|
