| Author |
Topic: MSA Pedal Rod Ball |
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 18 May 2009 7:28 pm |
|
I need a couple pedal rod balls. I replaced one on my 1976 MSA and it broke again. Never had this problem before. If anyone has a couple to spare, shoot me a price.
Thanks
Dennis
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
 |
David Nugent
From:
Gum Spring, Va.
|
Posted 19 May 2009 2:29 am parts
|
|
| Dennis...Roy Thomas of Pedalmaster guitars had at one time stocked replacement parts for MSA guitars, you might try contacting him. |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 20 May 2009 9:02 am
|
|
GeorgeL sells the complete ball joints here: http://www.georgelsstore.com/steelacc.html.
I broke a few of those balls on my 70's era MSA before I finally figured out why. If you have the ball in the upper hole, it won't screw in flush to the pedal because the setscrew that holds the pedal shaft is in the same hole. If you grind off enough of the threads so that it will screw in flush, you won't break them any more.
_________________
Jim Smith
-=Dekley D-12 10&12=- |
|
|
|
