Question for Ken Fox, or other amp guru's....

Chuck Snider R.I.P. · From: West Virginia, USA - Morgantown, WV

In the NV400's and I suspect the other Peavey (possibly other brands as well) the connector for the reverb tank loosens/corrodes/etc. causing noise in the amp. To help prevent this in the future for those type connectors, would it be ok to put a little dab of di-electric grease in the connector before re-connecting? That is often used in auto spark plug wires to prevent leakage and corrosion on the connectors. Any thoughts as to whether this would be ok or not?

-Chuck
_________________
GFI U-12 Ultra Keyless, Carter Black U-12, both with Alumitones, and a sweet '70 Sho-Bud Permanent D-10, NV400 in Rick Johnson cabs, NV112, '73 Vibrosonic in Rick Johnson cabs, Hilton pedal, Steeler's Choice seat, Bessdang Gizmos from Dale Hansen, and a few other widgets and doodads.
I may not sound good, I just don't wanna sound bad.

Adam Sorber · From: Pennsylvania, USA

I've repaired alot of NV400 and other amp's reverb tank connections. I prefer to use "de-oxit gold" for all audio connections. It is available from www.partsexpress.com
_________________
Adam Sorber
Sho Bud PROII custom D-10
Sho Bud PROII custom SD-10
Fender Super Twin Reverb
Fender Ultra-linear Twin Reverb

Adam Sorber · From: Pennsylvania, USA

I've repaired alot of NV400 and other amp's reverb tank connections. I prefer to use "de-oxit gold" for all audio connections. It is available from www.partsexpress.com
_________________
Adam Sorber
Sho Bud PROII custom D-10
Sho Bud PROII custom SD-10
Fender Super Twin Reverb
Fender Ultra-linear Twin Reverb

Ken Fox · From: Nashville GA USA

I re-tension and use dielectric grease on ever one I service

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: