Little screw inside Goodrich L120 pedal?

Tony Harris · From: England

Just changed the pot inside my Goodrich L120 pedal - to the Dunlop, sounds and feels good. But I had trouble finding a hex key to fit the set screw which holds the brass collar round the pot shaft. I tried every metric and imperial key I could find (I'm in the UK) and none properly fitted. I managed to unscrew and re-tighten the screw with pliers, but feel it may come undone at any time if it's not tightened properly. Does anyone know what fits this? Or can anyone point me to the Goodrich website - I haven't been able to find it yet... Thanks, Tony H.

Billy Murdoch · From: Glasgow, Scotland, U.K.

Tony,
I cannot really help with the actual size of the allen key You need but from experience with U.S.equipment the hex sizes used are very often in 1/64".
I had a similar problem with a key for an Emmons which I assumed was 1/8", or 3m/m and it turned out to be 5/64"
Hope this helps

Billy

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: