| Author |
Topic: NEED a Peavey N-400 Schematic ** not ** layout |
Kurt Kowalski
From:
Kendall, NY USA
|
Posted 2 May 2009 6:05 am |
|
Hey Gang!!!
I have a need for the Nashville 400 schematic
(NOT the layout of the board, that is out on the internet)
I call Peavey and the person I spoke with kept insisting that the Layout was the schematic....
I beg to differ but that IS NOT the case.
I teach electronics...
The reason is that I (my students)am/are in the midst of troubleshooting a 400 and the layout does not help me out with some of the diode values and types.
Does anyone have a digital copy of the schematic that you can email to me?
I would be greatly appreciative.
Ken Fox are you out there, can you help?
Have a great Saturday all!
Kurt |
|
|
 |
Pit Lenz
From:
Cologne, Germany
|
Posted 2 May 2009 6:23 am
|
|
Hello Kurt,
here is an older thread about that.
If you contact Ray Minich, he might be able to help as he kindly offered in this thread before.
pit |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 2 May 2009 6:25 pm
|
|
Kurt,
Please disregard my email, unless you need/want what I offered. My eyes saw 400, and my brain kicked in before it saw it all, sorry..
Bill
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Bob Metzger
From:
Waltham (Boston), MA, USA
|
Posted 3 May 2009 10:35 am
|
|
The Nashville 400 schematics I've seen, as provided by Peavey, have the parts layout on one side and the schematic on the other side. I believe Peavey has a liberal attitude about providing these documents to their customers for little or no cost.
_________________
Bob M. |
|
|
|
Jim Peters
From:
St. Louis, Missouri, USA, R.I.P.
|
Posted 3 May 2009 12:06 pm
|
|
Send me your e-mail by pm, I will send you the schematic. JimP
_________________
Carter,PV,Fender |
|
|
|
