| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic boss RV-3 pedal
Reply to topic
Author Topic:  boss RV-3 pedal
Francis Smyth

 

From:
Fermanagh, UK
Post  Posted 30 Apr 2009 7:28 am    
Reply with quote

Anybody out there using one of these pedals.Some feedback please and the settings please. Thanks in advance
View user's profile Send private message Send e-mail
Cliff Kane


From:
the late great golden state
Post  Posted 1 May 2009 8:45 am    
Reply with quote

Hi Francis,
I'm surprised that there hasn't been more response as this is a popular pedal with pedal steel players. If you do a forum search you will find a lot of comments on this pedal. I have had one for a couple of weeks, and it's a good, useful pedal. It is not the greatest sounding reverb or delay in the world, but it's okay. It sounds digital, but not horribly digital, it just doesn't sound very analog if you like that. The plate reverb is usable, the others sound too digital to me. The delay is a really basic digital delay, with a max time of 2 seconds. For my tastes, I prefer my amps' spring reverb, and I prefer some of the other delays and echos that I have, mainly my tape echo and my Ibanez analog delay pedal, but the RV-3 is a decent double-duty plug-it-in-and-you're-set kind of pedal. I think if you need a pedal for reverb and you need a pedal for delay this would be a good option. If you already reverb that you like there may be better sounding and more versatile delays out there. If you already have a delay that you like you may find a better sounding reverb pedal. But for a nice little combo pedal this is okay. People say that Lloyd Green uses one and that his setting are something like: Mode 7; Balance @ 8 o'clock; Feed back at 10 o'clock; Reverb Time @ 1 o'clock. This setting makes a moderate delay going into a plate reverb. I like this pedal best for trippy sound effect with my recorder: it will do some pretty wacky things, too. For the $100 I paid for mine I'm satisfied. It's a nice looking pedal. People say the RV-2 has a better tone, but that pedal does not have a battery compartment, but it's best to run a pedal like this off of an AC power supply anyway. Berhinger makes a clone of it for not too much money.
View user's profile Send private message Send e-mail Visit poster's website
Michael Douchette


From:
Gallatin, TN (deceased)
Post  Posted 1 May 2009 10:17 am    
Reply with quote

Quote:
If you do a forum search you will find a lot of comments on this pedal.


Probably why there hasn't been many replies...
_________________
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.

http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html

(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
View user's profile Send private message Visit poster's website
Casey Lowmiller

 

From:
Kansas
Post  Posted 3 May 2009 8:06 pm    
Reply with quote

Francis,

Some where on to forum, there is a thread about RV-3 settings. There are many, many opinions on what sounds best. A lot of the people tend to use the settings that Lloyd Green used with his RV-3.

If you find that thread that mentions the Lloyd Green settings...you'll be right in the neighborhood of good settings. Then, just tweak until it is to your liking.

These are simple & fairly reliable pedals. The copies made by Behringer aren't too bad either. They are cheaper to purchase than an old RV-3. They are the Behringer DR-400.

Casey
_________________
Known Coast to Coast as
"The Man with The Plan"
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron