profex problems...

Popp Gustafsson · From: Finland

Hep.My profex 2 says suddenly only
*****BYPASSED*****. What is happening??? Rolling Eyes

Popp

Bob Knight · From: Bowling Green KY

Popp,
You can probably reset it and get it going again. BTW, when you reset it, you will lose your stored presets.

TO RESET;
<b>Press and hold the PLAY and GLOBAL buttons on power up.</b>

You probably need to also check the battery,

Bob Smile

Popp Gustafsson · From: Finland

thanks Bob.
I did push play and global for some seconds but nothing happens...

Popp Gustafsson · From: Finland

Oh yeah...
I did not read the hole message i guess...
Now i did it the right way, and it worked Very Happy

Thanks again Bob

popp

Ken Fox · From: Nashville GA USA

If that is you are going to do you will have troubles soon again. Check the battery. There were only two types used, one that leaked and one that will eventually leak

No exception!!!

Bob Knight · From: Bowling Green KY

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: