| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Milk Man Mini PSA
Reply to topic
Author Topic:  Milk Man Mini PSA
Paul Sutherland

 

From:
Placerville, California
Post  Posted 25 May 2022 5:27 pm    
Reply with quote

Try swapping out the solid state rectifier for a tube rectifier. I just did and I'm loving it.
_________________
It don't mean a thing if it ain't got that swing.
View user's profile Send private message Send e-mail
Jim Robbins

 

From:
Ontario, Canada
Post  Posted 25 May 2022 7:25 pm    
Reply with quote

Yeah, I had Tim put in a tube rectifier from the get go. Fantastic sounding amp.
View user's profile Send private message
Tal Herbsman


From:
Wisconsin, USA
Post  Posted 27 May 2022 6:37 am    
Reply with quote

Me too! One of the advantages of replacing the SS rectifier is that it is a little less loud which is perfect for my needs.
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 27 May 2022 7:45 am    
Reply with quote

My Mesa/Boogie has a switch on the back "Vintage/Bold" that switches rectifiers. I always preferred the solid state rectifier for pedal steel because it gives a little more headroom and doesn't sag on a strong attack. I haven't thought about it recently, though. I used that amp with a lap steel at a jam last night, and now I'm reconsidering my choice. Thanks for jogging my memory.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Paul Sutherland

 

From:
Placerville, California
Post  Posted 27 May 2022 7:07 pm    
Reply with quote

I looked at the tube complement on various Little Walter amps and all that I saw had a rectifier tube. Of course, they also had octal preamp tubes. Perhaps a tube driven rectifier is at least part of the tone so many are seeking.
_________________
It don't mean a thing if it ain't got that swing.
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 27 May 2022 9:57 pm    
Reply with quote

Paul Sutherland wrote:
I looked at the tube complement on various Little Walter amps and all that I saw had a rectifier tube. Of course, they also had octal preamp tubes. Perhaps a tube driven rectifier is at least part of the tone so many are seeking.

I don't see how the rectifier can effect tone. The differences I notice are in the attack envelope and headroom. As I understand it, the rectifier isn't in the signal path, but it affects the ready availability of power to the tubes. The tube is slower to respond than a solid state diode bridge. (I might be wrong about that - I'm not an electrical engineer.)
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 11 Jun 2022 6:38 am    
Reply with quote

b0b, short answer is that it can affect the tone, somewhat, because as the B+ (and B-) voltages change throughout the circuit, the linearity of the frequency response changes. These are really tiny changes, to be sure, but they're apparently important to some players.
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 11 Jun 2022 7:28 am    
Reply with quote

Thanks for the clarification, Donny. Too subtle for me to notice, I guess.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Dave Mudgett


From:
Central Pennsylvania and Gallatin, Tennessee
Post  Posted 13 Jun 2022 12:56 am    
Reply with quote

I think the biggest impact of solid-state vs. tube rectification occurs when the amp is pushed pretty hard. Like beyond the design rating of the amp.

For a lot of guitar players, the primary use case is pushing the amp way beyond the limits of what the designers had in mind. Amp pretty much cranked, and additional gain (sometimes a lot), distortion, and other effects in front of the amp. At this point, I think the voltage sag can have a huge impact on the overall sound. And different rectifiers have different current capacities, and produce more or less B+ voltage/current sag when pushed.

But I don't think it is necessary to push the hell out of an amp to notice the difference between a SS rectifier and anything but a real stout tube rectifier like a GZ-34/5AR4. For example, a lot of older, mid-powered Fender tube amps like the Deluxe, Vibrolux, Super, and Pro Reverbs came with either 5AR4 or 5U4 rectifiers, at various times in production. Unless I was going for a real tight guitar sound, I generally thought that the 5U4 sounded noticeably sweeter when pushed moderately with a guitar. For blues or rock and roll, I have almost always preferred the 5U4. Of course, most pedal steel players prefer more headroom. And if the extra clean volume is needed, going to the heavier rectifier makes sense. But I think some sweetness is lost when pushed.

I see this as follows - power tubes do have a somewhat more gradual saturation response vs. volume than typical bipolar transistors. And the transformer can saturate some too. But I think even most power tubes saturate fairly sharply on their own, given an unlimited B+ supply. The response will stay pretty linear and then cutoff fairly quickly - this can be verified on a scope with a test circuit and a signal generator. But the voltage sag from a not-so-stout rectifier (which can be measured) can start pretty early and make that saturation start earlier and more gradually kick in. That's what I hear with a lower-capacity rectifier. I've used tons of mid-power Fenders and that has always been my conclusion.

As an example, I think that the saturation response of, let's say, a Twin Reverb being pushed is qualitatively different than, let's say, a Deluxe or Super Reverb. Of course, one must take into account the differences in overall volume. But I think there's a reason, beyond sheer volume (which is frequently a no-no on stage) why Twin Reverbs have lost popularity among guitar players relative to their smaller brothers. Yes, the smaller amps are not as loud and compress/distort at lower volumes. But I think the character of the compression/distortion is also different, and I think a signficant chunk of that is the tube vs. solid-state rectification.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron