| Author |
Topic: Sprezel |
Billy Knowles
From:
Kenansville, N. C. 28349 usa
|
Posted 26 Mar 2009 8:55 am |
|
I have a 90s Legrande with Sprezel keys on it. Some are a litle hard to turn. I sent them back to the factory and they really did a good job repacking them and loosening them up but some are not a smooth as I would like. They said that they did not make that key anymore.
Has anyone replaced the Sprezel keys on their guitar, if so what key did you use and did the holes match up.
Does anyone have any suggetions as to a replacement that the holes would match up on.
Thanks
BIlly |
|
|
 |
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 26 Mar 2009 10:01 am
|
|
Billy it's Sperzel,Stu 
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 26 Mar 2009 10:42 am
|
|
| To loosen the tight ones up, you might try loosening up the screw in the top of the button a tiny bit. Don't loosen it up too much, as it will increase the slack (slop) in the tuner. |
|
|
|
A. J. Schobert
From:
Cincinnati, Ohio,
|
Posted 26 Mar 2009 11:07 am
|
|
| Are you saying that you can't find new tuners that will fit into the keyhead since the holes on the keyhead are either to big or to small? |
|
|
|
Curtis Mason
From:
Ohio, USA
|
Posted 26 Mar 2009 4:30 pm
|
|
I had the same issue with an old Sho-Bud that used the same tuner keys. I bought 10 new replacements from Bobby Seymore...maybe he still has some.
_________________
Star Steel Guitar, G.D. Walker's Stereo Steel System, Hilton Volume pedal, TC-M1 Effects Processor, Peterson StroboFlip Tuner |
|
|
|
