| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Strings to use on a jazz box.
Reply to topic
Author Topic:  Strings to use on a jazz box.
Michael Haselman


From:
St. Paul
Post  Posted 18 Feb 2009 7:19 am    
Reply with quote

I know a lot of you have one. I'm getting one for the first time, thanks to a fellow forumite. I want the mellower sound, so I probably shouldn't use my usual GHS Boomers, should I? Do people still use flat-wounds on these?
_________________
Mullen RP D10, Peavey NV112, Hilton volume. Hound Dog reso. Piles of other stuff.
View user's profile Send private message Send e-mail Visit poster's website
Bill Hatcher

 

From:
Atlanta Ga. USA
Post  Posted 18 Feb 2009 7:22 am    
Reply with quote

You can use a flatwound if you like or some sort of flat "polished" also. If you need to use a round wound, just trim off some treble on the amp and on the guitar tone control.
View user's profile Send private message Send e-mail
Dave Mudgett


From:
Central Pennsylvania and Gallatin, Tennessee
Post  Posted 18 Feb 2009 8:54 am    
Reply with quote

I most commonly use flatwounds on electric archtops. For more subdued sounds, I like the Thomastik Swing-Series flatwounds. The core is softer, they seem to have a bit lower tension, and the low wound strings are smaller gauge than typical, but they are not exactly cheap. See, for example, http://www.juststrings.com/thomastikinfeldelectricguitarjazz.html

I sometimes use D'Daddario chromes - see, e.g, http://www.juststrings.com/daddarioelectricguitarchromes.html - they're quite a bit less expensive and good-sounding to me. I tend to leave these on a long time.

I don't think there's anything wrong with putting regular round-wound strings on an archtop, though. In fact, for swing/jump blues, I generally prefer them. It just depends on what I'm going for. I've been meaning to try the Thomastic Bebop round wounds, which are supposed to be a round-wound jazz string with a bit more bite, and no doubt a more standard round-wound feel. Haven't tried 'em yet, though - see, e.g., http://www.juststrings.com/thomastikinfeldelectricguitarbebop.html

There are other flatwounds also, like Fenders. The guy I studied with will have nothing else, in .013-.054 - http://www.juststrings.com/fenderelectricguitarstainlessflatwound.html [fixed link]. That's the first I recall seeing Fender flats in an .011-.050 set. I may just have to try some of those - one thing pedal steel has not helped with is hand strength for medium gauge strings. And the price is right too.


Last edited by Dave Mudgett on 2 Mar 2009 7:41 am; edited 1 time in total
View user's profile Send private message Send e-mail
Michael Haselman


From:
St. Paul
Post  Posted 18 Feb 2009 9:14 am    
Reply with quote

Thanks much, Dave. I've been using 11's on my Tele and Strat for about 20 years now, so 13's shouldn't be a big problem. Lots less string bending and such. I've got the 2 Jim Ferguson Jazz/Blues books and am bound and determined to be at least a crappy jazz player.
_________________
Mullen RP D10, Peavey NV112, Hilton volume. Hound Dog reso. Piles of other stuff.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron