| Author |
Topic: Peavey Nashville 1000 Settings |
Nick Reed
From:
Russellville, KY USA
|
Posted 14 Dec 2008 7:09 pm |
|
For those of you who may still be using Nashville 1000's. . . .I'd like to know what your settings are. I've got some that Ernie Cawby gave me and they sound pretty darn good. But I'd like to know how some of the rest of you set yours.
If you will, post how you set your N-1000 starting from L to R.
Thanks, Nick |
|
|
 |
Marty Holmes
From:
Magnolia ,TX USA
|
Posted 15 Dec 2008 5:13 am
|
|
Nick try this
lows +9
mids -9
shift-800
presence+3
highs+3
gain 2 or 3
volume 5 or 6
I have not played through a 1000 in a few years but if memory serves me correctly these were the settings i used. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 15 Dec 2008 6:23 am
|
|
Nick, my Nashville 1000 and 112 settings generally are the same (but then they both use the same preamp).
Generally the same as Marty's except for -2 to -3 on the Mids. The High and Presence vary depending on how new or old the strings are. |
|
|
|
Terry Sneed
From:
Arkansas,
|
Posted 18 Dec 2008 3:17 pm Nashville 1000
|
|
Nick, here's my settings, and I think I get a fantastic tone through my 1000. 
Pre 4
Low + 9
Mid - 15
Shift 800
High -3-6
Pres +3+6
Reverb RV-3, but when I use the Delay on RV-3, I use my amp reverb, which sounds real good with the Burr Brown chips. Amp reverb 4 1/2
Post 5
Terry
_________________
1997 emmons legrande lll 8&5/ Nashville 112 with Fox chip mod LTD 400 / American Tele / John Jorgerson Takamine/ W/S Rob Ickes model dobro/
"May God Bless America Again" |
|
|
|
