| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic "Lapmaster"
Reply to topic
Author Topic:  "Lapmaster"
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Nov 2008 8:10 am    
Reply with quote



I have this guitar on its way from Loni Specter.
It is 8 string with two pickups and a blend control.
If all works out, I plan on mounting a Trilogy changer w/roller nut on it.
I also have a set of legs w/flanges coming for it.
Should make for quite a guitar! Very Happy
View user's profile Send private message Send e-mail
Mark Eaton


From:
Sonoma County in The Great State Of Northern California
Post  Posted 27 Nov 2008 8:23 am    
Reply with quote

Very cool - the two pickups with the blend control is a nice feature.

And along with legs, it looks like if it had a strap button on the tailpiece, you could use a dobro strap for stand up playing and it would be very comfortable.
_________________
Mark
View user's profile Send private message Send e-mail
Danny James

 

From:
Summerfield Florida USA
Post  Posted 27 Nov 2008 8:24 am    
Reply with quote

That should make you a very nice guitar.

Using a roller nut to compliment the tuning changer I believe is a wise decision. Smile

Let us know how you like it and how well it stays in tune.

Best of luck.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Nov 2008 8:30 am    
Reply with quote

Yes, I'm excited to receive it. Loni sent it out even before getting my check.
I think the shape is quite similiar to the lap steel that Peavey is putting on the market, but I wanted one with 8 strings.
I got a "redneck" from Loni a few years ago, put it on a Strat along with a Trilogy and roller nut and this worked out very well.


View user's profile Send private message Send e-mail
Mark Eaton


From:
Sonoma County in The Great State Of Northern California
Post  Posted 27 Nov 2008 8:37 am    
Reply with quote

I'm sure there will be no comparison between this hand crafted guitar (aside from the general shape) and the Peavey Power Slide that no one seems to actually own as of yet.

I do recall Bobbe Seymour writing that he was working with Peavey to also have an 8 string model available.

But this is sort of an apples to oranges comparison, since this guitar from Lonnie no doubt didn't come cheap!
_________________
Mark
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Nov 2008 8:44 am    
Reply with quote

Mark,
No, I certainly agree with you. I'm sure the only thing they have in common would be their shape.

I'm thinking it will have a Stringmaster tone as it is made of ash and the pickups are a Stringmaster design.
View user's profile Send private message Send e-mail
David Baker

 

From:
Nevada, USA
Post  Posted 27 Nov 2008 11:53 pm    
Reply with quote

Looking forward to hearing your impressions. I've been thinking about that exact set-up.
View user's profile Send private message Send e-mail
John Billings


From:
Ohio, USA
Post  Posted 28 Nov 2008 7:25 am    
Reply with quote

I've used Hipshot products since they first hit the market. I've experimented with every kinda roller bridge and roller nut you can think of. They're totally unnecessary tone suckers! If your nut slots are cut correctly, and are just slightly lubed with something like "Nut Sauce," you will have no problems, and will be rewarded with much better tone, and much, much longer sustain.
BTW. Loni's stuff is great! Here's my "Redneck."


View user's profile Send private message Send e-mail
Terry VunCannon


From:
Greensboro, North Carolina, USA
Post  Posted 28 Nov 2008 2:34 pm    
Reply with quote

And my "Redneck-Tele"...Such a great player...


View user's profile Send private message Send e-mail Visit poster's website
Chuck Mahoney

 

From:
New Jersey, USA
Post  Posted 30 Nov 2008 10:12 am    
Reply with quote

I have the Hipshot Trilogy installed on my American Deluxe Strat for slide work - this guitar came equipped with a roller nut which I felt was critical for tuning stability. I can say this guitar sustains like crazy, especially now that it is essentially a "hardtail". I haven't noticed any reduction in sustain when compared to my other guitars. I lubricate the roller balls with some light german machine oil occasionally.
View user's profile Send private message Send e-mail Visit poster's website
John Billings


From:
Ohio, USA
Post  Posted 30 Nov 2008 10:54 am    
Reply with quote

Chuck, there's only one problem:
"this guitar came equipped with a roller nut which I felt was critical for tuning stability."
From my constant tinkering, over a few years time, I discovered that the roller bridge and nut are not necessary. I use a Hipshot with B and G benders, and three toggles. Sorta a "Pre-Trilogy" design. I get standard tuning, dropped D, and double-dropped D, and Low Bass G tunings. Two toggles lower the Es to Ds. The other lowers the A to G. I used them constantly onstage. Much more often than one would use a Trilogy to change tunings.
I, too felt rollers were "critical for tuning stability." A good luthier proved me completely mistaken. A correctly cut nut, with it's slots angled right, cut to the right size, and smooth is all that is required. A little bit of lube, and you're all set.
Your guitar came with a roller nut. It might sound much better without it. And, frankly, you don't know that!
Of course, some people love gadgetry! I do too! But found rollers to be unnecessary tone suckers. The best thing you can add to a guitar with Hipshot stuff on it, is locking tuners. With constant changing of string tensions, the most likely place to cause problems is the winding of the string around the tuner post. The fewer turns, the better! With the Sperzel's that I use, I'm able to go less that one turn around the post on the wound strings (no string windings slipping over themselves, and not returning in tune), and less than two windings on the un-wound strings(which are very seldom the problem).
View user's profile Send private message Send e-mail
Chuck Mahoney

 

From:
New Jersey, USA
Post  Posted 30 Nov 2008 8:02 pm    
Reply with quote

My Strat has locking tuners as well, and my sustain comparison is with another similar Strat that does not have a roller nut. But hey, it works so what the heck.

I change from E to D to G to standard tuning throughout my sets.
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 1 Dec 2008 7:43 am    
Reply with quote

When a Fender T-8 Stringmaster was my main ax, I had an A6th, a C6th and a C#minor 7th tuning on it.

I am planning to duplicate these three tunings on my 8 string "Lapmaster" with the Trilogy changer.
View user's profile Send private message Send e-mail
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 1 Dec 2008 12:37 pm    
Reply with quote

Erv -

You mean this baby?

http://store.hipshotproducts.com/cart.php?m=product_detail&p=162


How much up and down can it tune? 2 frets? more?
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 1 Dec 2008 12:55 pm    
Reply with quote

Tom,
Yes, that's the one.
I don't see it on the website but I am also getting an 8 string roller nut to go along with it.
I'm getting the set from Todd Clinesmith here on the Forum.
I think the range of change varies by string. As you are aware of, it takes a longer throw to change the tone of a higher string as compared to a lower one.
On the three tunings, there isn't much of a need to go up or down more than a tone.
My 1st string will be an E on all three tunings.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron