| Author |
Topic: Steel Guitar Nashville and crew |
Ricky Littleton
From:
Steely-Eyed Missile Man from Cocoa Beach, Florida USA
|
Posted 15 Sep 2008 2:31 pm |
|
I recieved my re-worked Sierra back from SGN friday and just wanted to post my appreciation for a super job done by a super group of folks!
My guitars arrival at the shop coincided on the exact same day as Bobbe was injured. The crew still managed to turn the guitar around in good time.
Dan and Jill were simply great and Mike Cass was a pleasure to talk to on the phone about the work he did.
The guitar plays GREAT!
Without a doubt SGN is a class-act.
The Sierra makes it first public debut on the 26th of this month and I cannot wait.
Just my $0.02 worth!
Ricky...
_________________
Emmons LeGrande - 8x4,
Gwin Steel custom tube amplifier ,Goodrich Volume pedal, Peterson VS-II Tuner, E-Bow, Bo-Bro |
|
|
 |
John Roche
From:
England
|
Posted 16 Sep 2008 4:24 am
|
|
Ricky, Can you get a close up photo of where the rods connect to bell cracks, if your guitar is a uni then just the first three pedals would do.
The reason is I have had a tuning problem on the A pedal, the stop nut screw was bending when I put too much preasure on the A pedal. I have had to strip down the cross shaft to remove the screw and get it back into shape, I need a photo of that area to check if I put it back correctly.. as you know there are a lot of adjustment screws on the Sierra Thanks John |
|
|
|
Richard Ingley
From:
Bowie, Texas, USA
|
Posted 17 Sep 2008 12:29 pm
|
|
| John: Go to sierrasteels.com. They have an online manual which might have what you are looking for. |
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 17 Sep 2008 4:16 pm
|
|
Ricky, Thank you for the appreciation, I (we) always try to serve you great players in a prompt and pleasant manner!
You guys are my life.
Bobbe |
|
|
|
