| Author |
Topic: Can you run stereo outputs thru one speaker ?? |
Eddie Cunningham
From:
Massachusetts, USA
|
Posted 25 Aug 2008 3:37 pm |
|
| Question for you electronic wizzards !!! I have a stereo power head amp and wonder if I can run both outputs thru one speaker ?? I want to run a mellow sound thru one side and a sharper treble thru the other and then mix them into the one speaker !! I would rather not carry two speakers around . Is this possibly O.K. ??? Or do I need the two speakers ?? I won't try it till I know if it will blow up or melt the speaker !!??? Eddie "C" ( the old non-pedal geezer ) |
|
|
 |
Peter Siegel
From:
Belmont, CA, USA
|
Posted 25 Aug 2008 4:06 pm
|
|
| No |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 25 Aug 2008 5:07 pm
|
|
| If you do it, say goodbye to your amp. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 26 Aug 2008 12:13 am
|
|
| Yes, you need two speakers. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Aug 2008 6:01 am Dead short
|
|
| It's not a wise thing to do to an amp. It will either destroy it or damage it. However, Peavey solid state amps will see the dead short and shut down to keep from burning themselves up. |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 26 Aug 2008 6:32 am walker stereo steel
|
|
| if you are using a walker stereo amp, all you have to do is plug one 4/ohm speaker into the right speaker output. it is designed to do get the same effect as 2/speakers.if you look in the amps for sale section you will see mine, a friend of mine helped build the cabinet an it sounds the same as 2/cabinets stacked.....thanks jack |
|
|
|
Eddie Cunningham
From:
Massachusetts, USA
|
Posted 26 Aug 2008 7:00 am Strong NO - NO !!!
|
|
| Thanks , guys for the info !!! I guess I won't try that one !! I'll have to go with two light weight speakers or just use the one mono !! Thanks !! Eddie "C" |
|
|
|
