| Author |
Topic: Slyde-Car/ VP mount units, etc - (updated 7/15 ) |
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 13 Mar 2008 4:44 pm |
|
I have four Slyde-car units available at a discount.
These units were built to use as displays at SG shows, but they are new, not used.
All four of these units are built for D-10's, or SD-10's. These are the standard sized trays for a 7/8 bar.(Silver vein powder coated)
 
To be a viable candidate, the spread between the legs needs to be no wider than 10 3/4 inches directly under the endplate.
Also, I have a set of volume pedal mounts built for a Carter guitar.(also a demo set, & powder coated)
The Vp mount is a two piece system, as shown below.
If interested, I'd still need to get a couple of measurements on your guitar, to ensure a good fit.
 
And as always, I'll still build you a custom Slyde-car unit,(2 tray sizes) or VP mounts, and the Pak-Rak (chart holder) too.
Picture file(Pak-Rak)
Call me at (615) 618 0776, or e-mail me at dale@bessdang.com
Thanks,
Your pal, Dale
Last edited by Dale Hansen on 15 Jul 2008 9:20 pm; edited 13 times in total |
|
|
 |
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 23 Mar 2008 12:19 pm
|
|
I still have two of these Slyde-car demo's available for immediate shipping.
Happy Easter to y'all. |
|
|
|
Joe Rouse
From:
San Antonio, Texas
|
Posted 27 Mar 2008 3:52 pm Slyde-car
|
|
Dale my Friend,
I received my Slyde-car today and am impressed. Fits good and easy to mount, attractive in looks, and I like the dividers that can be moved if need arises.
Also enjoyed our telephone conversation the other day, hope to get to meet you in person this coming July when my bride and I will do some "get out of Texas" traveling.
Once again I am very happy with my Slyde-car and feel it is worth every dollar I spent on it. Take care and see you in July I hope...jr |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 27 Mar 2008 7:33 pm
|
|
I love my Slyde-Car. I've got the movable dividers arranged so that they hold my picks upright. I can reach down and stick my fingers and thumb down into the picks and pull my hand back with all three picks in place - one handed. Same way when taking off my picks. I just stick the tips of my fingers and thumb into the Slyde-Car and pull my hand back, leaving the picks in place for the next time I need them.
Great product and it looks to be indestructible. All metal. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 29 Mar 2008 8:07 am
|
|
Joe,
Thanks a bunch, and I'm so glad that you like it.
I really enjoyed our phone visit too, and look forward to getting together when you come out.
Call, or drop a line anytime you'd like.
Lee,
You're a good pal, I appreciate your frequent plugs here on the Forum. Thanks again.
Sorry about my delay in jumping in here to thank both you guys.
I started getting a little puny Thursday night, with a headcold, and bronchitis, so I haven't been online much. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 30 Mar 2008 2:08 pm
|
|
Carter mounts sold.
Two standard tray Slyde-car units remaining.
Ready to go.
 (mounted view)
Drop a me a line at dale@bessdang.com (or call)
(615)618 0776 |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 3 Apr 2008 10:04 am
|
|
Dale,
I'd like to purchase one of your Slyde-car units and one of your volume pedal mounts. Thank You,
Danny Bates |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 7 Apr 2008 9:05 pm
|
|
One more of the demo units left.
Thanks again Danny, I hope you like it, and get a lot of use from it.
DH |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 9 Apr 2008 10:33 am
|
|
Dale,
Thank you for making these products.
My volume pedal is rock solid now and it was easy to mount.
The Slyde-car fits both the Emmons and my Carter guitars. My guitar looks clean without bars, pick and wrenches sitting between the necks. Kinda like the feeling I get when I clean out my car!
Thanks again
Danny Bates |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 10 Apr 2008 5:55 pm
|
|
Thanks Danny,
I'm glad that the VP mounts, and Slyde-car worked out well for you.
I cleaned my truck out once,...several years ago,... so I sorta remember how that feels. |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 13 Apr 2008 5:07 am hi
|
|
I'll take the one thats left if it will fit my Williams.
ernie |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 13 Apr 2008 3:17 pm
|
|
It's yours Ernest,
Thats the last of the four demo units.
I build them to spec upon order, so anybody who still would like one can drop a me line, or call to get one built.
I do also have another set of VP mounts that are finished up, and ready to go. These mounts fit a GFI guitar, so if there's any GFI players out there who'd like to try out this mounting system, give me a shout, I'll give you a real good deal on em'. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 15 Apr 2008 9:54 am
|
|
I actually still have one more demo Slyde-car unit left.
One of the earlier takers decided that a larger tray unit would work out better for him, so the other one (standard tray unit) will be available again.
No clamps, or screws to mount these. They just hook right onto the guitar. |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
Posted 15 Apr 2008 5:08 pm
|
|
| I'll take the last one Dale....James |
|
|
|
Jim Cinney
From:
Tehachapi California, USA
|
Posted 16 Apr 2008 12:17 pm
|
|
Dale,
I got a slide car and it fits my guitar perfectly,looks damn good too.Now if it can only improve my playing. 
thanks again |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
Posted 16 Apr 2008 2:56 pm
|
|
Dale stopped watching the thread...He's counting his money  |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 16 Apr 2008 5:10 pm
|
|
Yup James, I've got enough cash now to last me the rest of my life.
That is,... as long as I'm dead by Saturday.
Your unit is on the way, shipped today....Mr.Smarty pants.
Mr. Cinney,
It's good to hear from you too. Didn't I send you some "magic dust" as well?... To sprinkle on your guitar, to make it lip smackin' rich with tone,... make your fingers fly, and amaze all onlookers?
Oh well, I'm glad you like the Slyde-car Jim.
On the bright side, you can use it to crease someones noggin, if they say something insulting about your playing. |
|
|
|
Chris Sims
From:
Middleburg,Florida, USA
|
Posted 16 Apr 2008 8:01 pm
|
|
| How much for the slyde car? |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 17 Apr 2008 9:01 am
|
|
Drop me an E-mail Chris. Not trying to hide, I'm just not real sure if it's o.k. with b0b to post pricing on new items in here.
I don't want to break any rule here.
Better yet, I'll just send you one now, with all of the info.
Thanks for your interest.
Your pal, Dale |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 17 Apr 2008 3:04 pm HI
|
|
dALE MINE CAMR TODAY NOT INSTALLED IT YET , GREAT FINE PICK HOLDER AND ETC. Did u get the money yet?????????????????????
ernie |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 17 Apr 2008 3:22 pm
|
|
Ernie,
Yup, it arrived yesterday, and thanks again.
When you get around to putting it on your guitar, let me know how it fits, and works for you. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 18 Apr 2008 2:02 pm
|
|
This week I've had some calls, and even as dense as I can be at times, they tipped me off that I may have inadvertently given a few guys the wrong impression that once these four demo's were gone, that was all there would be.
Not so. I'm still building them, upon order, and also the VP mounts, and Pak-Raks. You can still get one custom made for your guitar by contacting me by email or phone.
Thanks,
Your pal, Dale
(615)618 0776 or drop me a line at dale@bessdang.com |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
Posted 18 Apr 2008 2:23 pm
|
|
| Dale...Sell the one I got today and I will ship it to the buyer for you....Then you can make me one for a larger bar and I will send you the differnce in money, this one is not large enough for my bar........Thanks...James |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 18 Apr 2008 4:32 pm
|
|
James,
I'll have another one with the larger tray built, and on the way to you by Monday.
You can just send the other one back here. Goodenuff? |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 18 Apr 2008 4:40 pm
|
|
Well, I guess I still do have one more demo unit available.(Discounted price)
This one is for a standard 7/8ths bar, and fits a D-10 frame, with a leg spread of no more than 10.3/4 inches.
(See measure guide below)
 |
|
|
|
