Pedal Rack/Bar Clamping Question...

Matthew Carlin · From: Lake County, IL.

Hope somebody can point me in the right direction. I'm not sure I'm clamping my pedal bar on to the legs correctly. I seems like i have to tighten the wingnut extra tight to get it to stay in place. The guitar is a fessenden, the clamps slide over the leg then clamp at a 45 degree angle. I have to use a Screw driver to hold the screw in place then tighten to wing nuts to get the bar to stay in place.

Thanks

Matt
_________________
"Just tryin to make some music in the money business"

Dan Beller-McKenna · From: Durham, New Hampshire, USA

Matthew,

I have had the same issue with my Fessenden. To be fair, when I picked up the guitar from Jerry, I asked if there were any special maintainance issues I should know about, and he mentioned that those screws seem to fail a lot. I've been meaning to replace mine for a while but haven't gotten around to it. I have discovered that just using my fingers, so that it is not clamped down super tight, seems to hold the pedal bar in place just fine.

Dan
_________________
Durham, NH
dbmCk mUSIC

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: