Changing pickup.

Billy Murdoch · From: Glasgow, Scotland, U.K.

If all guitars were constructed like MSA I would'nt need to ask this question.
Is there a connector available anywhere that will join the two pickup wires?.This would eliminate the need for soldering
I am pretty hopeless at soldering.
Best regards
Billy

John Roche · From: England

Billy , any electrician can supply you with what you need, or go down to B&Q and pick one up ask for a Terminal block, you can fix it to the underneath of the guitar and have two wire from the jack socket to it and two from the pick up.

Billy Murdoch · From: Glasgow, Scotland, U.K.

Thanks John,I just was'nt sure if I could get one for such small core wire.
Billy

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: