| Author |
Topic: Mike Brown please help |
Jani Peter Sandvik
From:
Kolppi Finland
|
Posted 17 Mar 2008 12:50 pm |
|
Mike.
I have a session 500 that is in restauration. And i dont have the potknobs (ye know the grey,black,blue, and maybe white).
I have contacted peavey parts, and they responded once and they asked the serial number, and i said that i dont know it yet but soon i will get it. and i wrote in the mail that ill show it in a picture. And no responce after that. so Mike do you have any clue of these knobs .
_________________
Sandwich Productions
https://www.facebook.com/sandwichproducts/ |
|
|
 |
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 17 Mar 2008 6:21 pm Session 500 control knobs
|
|
Hello Jani,
Sorry for the delayed response, but I just returned home from the Texas Steel Guitar Jamboree. The original knobs were made by a company called Rogan(spelling?). We may have one color but I believe that our stock has pretty much been depleted. I will let you know when I return to work this week.
Mike Brown
Peavey USA |
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 19 Mar 2008 9:38 am Session 500
|
|
| Jani, Texas is always fun! Just as I suspected, the Rogan knobs are no longer available. However, we do have a replacement knob that will fit. It is #70900413. This is the only replacement that we have at this time. |
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
|
|
|
Keith Hilton
From:
248 Laurel Road Ozark, Missouri 65721
|
Posted 25 Mar 2008 9:01 am
|
|
| Mike, I tried e-mailing you and the e-mail returned. I recently bought an old Session 400 amp. I think it was one I had years and years ago. It was supposed to work, but when I plugged it in, there was a terrible hum. Can you e-mail me the steps I need to go through, or should I just send it into to the boys at the factory? |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Mar 2008 6:10 am Session 400
|
|
Keith, I am sending you a schematic under separate cover. If you cannot locate the source of the hum, I suggest that you send the chassis to us. The address is;
Peavey Service Center
Attn; Mike Brown
412 Hwy. 80 East
Meridian, MS 39301 |
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
Posted 8 Apr 2008 9:41 am
|
|
thanks ken it looks like those are the only ones to get right now 
And for you Ken and Mike. I asked some updates on the restauration. Then there are some chips that are custom from peavey what are those on session 500. And ill give the more detailed product codes as soon as i get them.
_________________
Sandwich Productions
https://www.facebook.com/sandwichproducts/ |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 8 Apr 2008 11:42 am Session 500 tone mod kit
|
|
| Here is a link to the Session 500 tone mod kit from the Peavey website. Originally, the IC was called the OPA2604, which can be purchased under our part number #30418424. You may order these parts by phoning toll free in North America at 1-877-732-8391, ext. 1186. |
|
|
|
Ken Pippus
From:
Langford, BC, Canada
|
Posted 8 Apr 2008 12:49 pm
|
|
Deviating from discussions of speaker availability for a moment, it's hard to imagine any other manufacturer having the involvement with the musical community demonstrated in this thread. Mike, you da bomb. (You too, Ken).
KP |
|
|
|
Jani Peter Sandvik
From:
Kolppi Finland
|
|
|
|
