| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic How to do a choke
Goto page 1, 2  Next
Reply to topic
Author Topic:  How to do a choke
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 28 Jun 2006 12:22 pm    
Reply with quote

I have been struggling to do a "choke"; raising a high B string to C or a any of the top three strings a half step.
I hold my bar in the traditional manner. but don't know the technique for using my middle or ring finger. Do you pull the string to the side or lift it while holding that string down with the bar...or what? Is there some material that explaines or shows this process?

I appreciate all suggestions.
View user's profile Send private message Send e-mail
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 28 Jun 2006 7:27 pm    
Reply with quote

Hi Tom

Use your ring finger and pull the string toward you. Takes a lot of practice, but you'll get it.

Harry
View user's profile Send private message Send e-mail
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 29 Jun 2006 6:30 am    
Reply with quote

Harry,
Thanks for the information. Like anything, it takes practice to make it look easy!
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 29 Jun 2006 6:52 am    
Reply with quote



Personnaly, I never liked the term "choke" ... it's got a bad ring to it. The above image is blurry, but you can see that I'm pulling the third string sharp with my 2nd finger supported by my ring finger. Using supporting fingers is a key concept to remember. I'm not doing it here, but I also sometimes drop the thumb to the side of the neck to further support the bend. You never pull up ... just straight back toward your stomach and paralell to the fretboard. You'll need to build up some under-used muscles as well as develop pulling-hand calluses, so my advice is to pratice it very slowly and in small increments so you don't fatigue your hand muscles. Here are some pull-string licks:
http://steelguitarforum.com/Forum8/HTML/000052.html
http://steelguitarforum.com/Forum8/HTML/000055.html

This arrangement of Bud's Bounce in E tuning using string pulls to imitate pedal steel licks:
http://steelguitarforum.com/Forum8/HTML/001097.html

[This message was edited by Andy Volk on 29 June 2006 at 08:00 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Roy Thomson


From:
Wolfville, Nova Scotia,Canada
Post  Posted 29 Jun 2006 7:03 am    
Reply with quote

I use left hand mid finger also.

You have to make sure the pull is in
a somewhat upward motion so the string
maintains contact with the bar.

With that in mind it is just a matter
of practice and it does not come easy.

------------------
http://www.clictab.com/RoyT/Roy_Thomson_Steel_Courses.htm
View user's profile Send private message Send e-mail
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 29 Jun 2006 7:06 am    
Reply with quote

Thanks Andy!
This is what I needed to see. I have some pretty good calluses on my left hand fingers from playing regular 6 string guitar, but I don't have the coordination developed for the pull technique.
View user's profile Send private message Send e-mail
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 29 Jun 2006 7:26 am    
Reply with quote

Andy

Why don't you just use your ring finger...it's easier, and you have better control of your bar? You're using your ring finger to back up your middle finger anyhow.

I've been doing string pulls for a hundred years, and I never got any callouses on my finger.

String pulls are real easy...but it does take a lot of practice and co-ordination to get it right.

Happy pulling

Harry
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 29 Jun 2006 7:33 am    
Reply with quote

Kayton Roberts has a huge callus from pulling strings. You must have superman hands, Harry. Why not give your hand the most support you can? Using supporting fingers for pedal steel-like bends on a standard guitar is recommend by masters of the technique like Arlen Roth. In my book, it just makes sense for lap steel too. But if your way works for you more power to you! . One other thing to keep in mind about string pulls is you pretty much momentarilly lose your vibrato when you're pulling.
View user's profile Send private message Send e-mail Visit poster's website
D Schubert

 

From:
Columbia, MO, USA
Post  Posted 29 Jun 2006 8:12 am    
Reply with quote

Sometimes called the "cheese slicer" technique for obvious reasons...
View user's profile Send private message Send e-mail
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 29 Jun 2006 11:16 am    
Reply with quote

Andy

Come to the HSGA Convention this year at Joliet, and we'll check out each others string pulls. LOL!

Harry
View user's profile Send private message Send e-mail
Ron Brennan

 

From:
Orlando, Florida, USA; Formerly, Edison, NJ
Post  Posted 29 Jun 2006 11:40 am    
Reply with quote

Tom,

Awhile back, I saw Harry at a Steeljam and I have to tell you, he is really good with String Pulls, as well as other techniques. We were amazed.

In my case, I agree with Roy's advise to keep the string your pulling against the bar. It's a slight upward pressure when you pull the string back. Andy's advise works too!!

Either way, the key is to work at it so it becomes 2nd nature. IMHO: It really doesn't take that long.

You'll be very glad to have this "must" trick in your arsenal and like Harry, not even think about it when you do it. TX

Rgsd,

Ron
View user's profile Send private message
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 29 Jun 2006 12:10 pm    
Reply with quote

Thanks for the compliment, Ron.

Anyhow, with slants, pulls, and various other tricks, who needs pedals.

I call my lap steel my "poor man's pedal steel." LOL!

Harry

[This message was edited by Harry Dietrich on 29 June 2006 at 01:12 PM.]

View user's profile Send private message Send e-mail
Bob Stone


From:
Gainesville, FL, USA
Post  Posted 29 Jun 2006 12:14 pm    
Reply with quote

I'm waiting for a gag photo from Howard R...
View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 29 Jun 2006 3:09 pm    
Reply with quote

I haven't see Howard do a choke on an a guitar yet, but I have seen one choke him...I think he ticked off a Fender one time...

[This message was edited by Jeff Strouse on 29 June 2006 at 04:11 PM.]

View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 29 Jun 2006 4:50 pm    
Reply with quote

Harry, do you use the whole finger?
View user's profile Send private message Send e-mail
Denny Turner

 

From:
Oahu, Hawaii USA
Post  Posted 29 Jun 2006 7:09 pm    
Reply with quote

You "disappoint" me, Howard. I dropped right in here thinking for sure that with this barn door wide open in the wind, you would have dropped the bombshell of the year!

Aloha,
DT~

[This message was edited by Denny Turner on 29 June 2006 at 08:10 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 29 Jun 2006 7:19 pm    
Reply with quote

No Howard...the one alongside that one.
View user's profile Send private message Send e-mail
Dan Sawyer

 

From:
Studio City, California, USA
Post  Posted 3 Jul 2006 4:44 pm    
Reply with quote

If you can choke and chicken pick at the same timeā€¦


well, you'd be choking the chicken.
View user's profile Send private message Visit poster's website
Dwayne Martineau


From:
Edmonton, Alberta, Canada
Post  Posted 4 Jul 2006 11:47 am    
Reply with quote

Now, how do you pull the string a full step without crashing into the next string if your string spacing won't allow it?

By the time I've pulled up a full step, the neighbouring string has already bent a quarter tone or more, so even if the bend is accurate, the whole thing sounds out of tune.

-Dm
View user's profile Send private message Send e-mail
Matt Johnson

 

From:
California, USA
Post  Posted 4 Jul 2006 11:55 am    
Reply with quote

Hi Tom,
Once you get the hang of pulling, try sliding to a different fret while the string is pulled. Then release the string at the new position. It can sound really nice (after your finger tips are broken in!).
View user's profile Send private message Send e-mail
Harry Dietrich


From:
Robesonia, Pennsylvania, USA, R.I.P.
Post  Posted 4 Jul 2006 12:04 pm    
Reply with quote

Dwayne

Sounds like your strings are too loose. That should never happen.

Harry
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 4 Jul 2006 1:50 pm    
Reply with quote

What Harry said. It's all in the scale length and string gauges. Billy Robinson can pull even the low strings. Sliding WHILE you're pulling a string! Ouch! You must be a Kung Fu master.
View user's profile Send private message Send e-mail Visit poster's website
Dwayne Martineau


From:
Edmonton, Alberta, Canada
Post  Posted 4 Jul 2006 3:07 pm    
Reply with quote

A bigger gauge makes sense. My C6 neck sounds a little thin anyway.

-Dm
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 4 Jul 2006 6:13 pm    
Reply with quote

Quote:
You "disappoint" me, Howard



Denny, I've got other fish to fry....stay tuned to No Peddlers. New material on the way.....


BTW, I use string pulls on G tuned dobro, pulling the 2nd string back & forth will give a pedal effect. Also tuning the B to C and pulling will do the same with a ninth flavor.

On C6, I like to pull the 2nd string, C to C# to give me a major triad or a dom7.

A great technique to learn. And yes, I've also seen Harry a pullin' & a chokin' and he gets a lot of milage out of his tuning.

View user's profile Send private message Send e-mail
Stephan Miller

 

From:
Silver Spring, Maryland, USA
Post  Posted 4 Jul 2006 7:08 pm    
Reply with quote

Hey Matt-- welcome to the Forum! Never heard anybody else mention that sliding/pulling-at-the-same-time thing. Glad I'm not the only loony to try this. Actually for anyone with a good set of guitar (or even better, bass) calluses, it's not that big a deal.

--Steve
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron