| Author |
Topic: Schematic for a Standel 83L15V |
Ken Fox
From:
Nashville GA USA
|
Posted 7 Mar 2008 9:22 am |
|
Got one in for Joe Turner and I sure could use a schematic to solve an old problem this amp has. Every electroltyic cap checked bad in it! Got them all replaced but I still have a 470 ohm, 2 watt resistor that is overheating and has been doing so for a long time!!
Woody is looking for me, he may come up with one. If you have one I sure would appreciate a scan or copy.
Last edited by Ken Fox on 8 Mar 2008 6:49 am; edited 1 time in total |
|
|
 |
Brad Sarno
From:
St. Louis, MO USA
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 7 Mar 2008 10:15 am
|
|
| I checked with Danny already. No luck at all! |
|
|
|
Hiro Keitora
From:
New York, New York
|
Posted 7 Mar 2008 5:19 pm
|
|
Ken, Tim Magg in Orange County was the guy who helped me out on my old Standel, but he maybe specializing on those epoxy dipped Standel.
<H> |
|
|
|
Vernon Hester
From:
Cayce,SC USA, R.I.P.
|
Posted 7 Mar 2008 9:29 pm Standel
|
|
Ken,
I have some around here somewhere.Will go out to my building this morning and look them up.
Vernon Hester |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 8 Mar 2008 6:51 am
|
|
| Much appreciated. I started to draw the power supply out, but it will be a chore! Hard to get a look under the main board to see all the connections. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 9 Mar 2008 7:21 am
|
|
I found the schematic for the power supply for the "hybrid" amp in the 1964 schematics at Standel(the S100V)
http://www.standelamps.com/support/schematics/1964.html
That was a great help. Got the problem nailed down now.
Still no schematic for the rest of the amp. This is the "hybrid" model with epoxy modules and a tube inverter and power tubes. Cool amp!! |
|
|
|
Michael Brebes
From:
Northridge CA
|
Posted 10 Mar 2008 8:04 am
|
|
I had schematics for a number of those amps, which I had received from Standel back in the late 60's. I gave them to the guy at Groove Tubes in Sylmar. They are large size D blueprint copies. Contact them and hopefully they've scanned them by now and can get you a file.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso
Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100 |
|
|
|
