| Author |
Topic: I need a LKV lever for a push/pull |
Danny Bates
From:
Fresno, CA. USA
|
Posted 15 Apr 2008 7:29 am |
|
Everything is already hooked up but the Lever and nut/bolt are missing.
Thanks in advance, you guys are great!
Danny Bates
Don't let my picture in my Avatar scare you... it's not really me.
Last edited by Danny Bates on 30 Apr 2008 6:19 pm; edited 1 time in total |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 15 Apr 2008 1:06 pm
|
|
Danny, I'm sure I can furnish what you need but I need more information. Are your levers black? Can you draw me a mental picture of the part(s) you need or email a photo of the undercarriage showing what is there now?
Jerry |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 15 Apr 2008 2:44 pm
|
|
The others are Polished Aluminum. It is working now and very easily lowers my 5th string on my B to Bb I guess the white thing on the right is a stop. Thank You
Last edited by Danny Bates on 30 Apr 2008 6:17 pm; edited 1 time in total |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 15 Apr 2008 8:04 pm
|
|
Danny, how long does the lever need to be to reach the stop? Danny, the compression spring that is showing in the photo needs to be turned around so the cut end rides against the set collar instead of the round surface of the swivel. If the spring turns any it will change the setting on the collar. I suppose if you have never had a problem with that pedal it is OK but the potential is there for a problem.
Jerry |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 15 Apr 2008 9:27 pm
|
|
Jerry, it's 5 and 3/4" from center of shaft to center of shaft.
Also thanks for the "heads up" on the springs. Now that you mentioned it, many of the springs on the guitar are cut on both ends. I probably need a ton of those springs too. Ah yes...the beloved push/pull. |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 16 Apr 2008 8:36 pm
|
|
Jerry, Please come back!
I need a Vertical knee lever.. Help!!!!!! |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 17 Apr 2008 3:19 pm
|
|
Danny, I will try to get it rounded up today and holler at you tomorrow. You might give me your mailing address in an email. rollermusic@cox.net
Jerry |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 17 Apr 2008 7:22 pm
|
|
| Thanks Jerry, I have a line on a black one if you can't find it. Thanks, Danny Bates |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 17 Apr 2008 7:38 pm
|
|
Danny, the black one would work fine and if you wish you can sand the black off leaving it like the others. I likely would have to take a lever ass'y apart to get just the blade so if you can get the black one let's try that route. If if falls thru, then let me know.
Jerry |
|
|
|
Danny Bates
From:
Fresno, CA. USA
|
Posted 17 Apr 2008 7:41 pm
|
|
Thanks Jerry, I will order the black one and I appreciate all of your help.
Danny Bates |
|
|
|
