| Author |
Topic: This MSA just does not look right.... |
Bill Hatcher
From:
Atlanta Ga. USA
|
|
|
 |
James Collett
From:
San Dimas, CA
|
Posted 28 Jan 2008 8:03 pm |
|
Don't look like no MSA...
almost looks like it was assembled with a bunch of different manuf'rs parts
_________________
James Collett |
|
|
|
Rick Nicklas
From:
Verona, Mo. (deceased)
|
Posted 28 Jan 2008 8:05 pm
|
|
Kind of looks like a Woodshop/Metalshop project.  |
|
|
|
Bent Romnes
From:
London,Ontario, Canada
|
Posted 28 Jan 2008 8:07 pm
|
|
There is something weird about that guitar.Maybe it's just the fact that the rear neck was taken off and without a pad it makes the whole guitar look too wide.
The blonde color also looks a bit strange
Aside from that and the Emmons fret board, I recall from memory that: The pedal bar and pedals look like MSA. As well, the undercarriage looks authentic to me.
The key head likewise. The pillow blocks are MSA as well. Ditto the loose knee lever.
The small pics don't help. For all we know it could be a home built, from readily available after market parts.
There's just something about that cabinet...
It will be interesting to see the winning bid... |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 28 Jan 2008 9:19 pm
|
|
| Bent Romnes wrote: |
There is something weird about that guitar.Maybe it's just the fact that the rear neck was taken off and without a pad it makes the whole guitar look too wide.
|
The rear neck was not taken off. There is no opening routed out for the changer to fit down into. The top plate of the body has been changed. |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 29 Jan 2008 11:11 am
|
|
Un-edicated guess....MSA parts, home/shop built cabnet. The bottom level looks too wide ( as per Bent )but the end plates look original and unmodified. Also looks too long,but all the underside parts look original MSA stuff that fit the cabinet & pedalboard. There is another homebuilt on this persons website.
this'n
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
Last edited by Bill Ford on 30 Jan 2008 10:25 am; edited 1 time in total |
|
|
|
Jerry Hayes
From:
Virginia Beach, Va.
|
Posted 29 Jan 2008 11:21 am
|
|
I saw an MSA SD-10 about twenty some years ago in SoCal that looked like this guitar but it had a pad. My question about this one is.....Didn't the MSA and Emmons have a different scale length? If so, and this is an MSA, the fretboard wouldn't work. Maybe they are the same scale but I always thought an MSA was the same scale length as a ShoBud.....JH in Va.
_________________
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!! |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 29 Jan 2008 3:38 pm
|
|
Couple of 'ya got it right!  This was (quite obviously, I might add), a D10 MSA. It's body has been replaced, and it's been made into an S10 "loafer", minus a pad. With exception of the fretboard, body (and maybe the neck), everything there is MSA. |
|
|
|
Darvin Willhoite
From:
Roxton, Tx. USA
|
Posted 29 Jan 2008 4:03 pm
|
|
MSA Classics are 24" scale, which is the same as an Emmons P/P, if memory serves me right (which sometimes it doesn't).
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro. |
|
|
|
John Drury
From:
Gallatin, Tn USA
|
Posted 29 Jan 2008 4:17 pm
|
|
Its doin ya right this time Darvin. That axe is all MSA but the fretboard.
That is probably why the guy offed it, intonation is driving him up the wall, and things really turn to $h!t upon entering "Hueyland".
The MSA is indeed a 24" scale, that Emmons fret board is a 24 1/4".
_________________
John Drury
NTSGA #3
"Practice cures most tone issues" ~ John Suhr |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 29 Jan 2008 4:37 pm
|
|
| John Drury wrote: |
| Its doin ya right this time Darvin. That axe is all MSA but the fretboard. |
If it is all MSA where is the opening for the C6 changer and the screw holes for the neck and keyhead?? |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 29 Jan 2008 6:17 pm
|
|
b0b. So sorry, but I have no idea what that code thing is. I just go up to the address line and cut and then paste that. When I click on the URL, it goes right to the page with the guitar on it. What is the problem??
This is a link to an Ebay page. It probably has to have all that junk in there to get you there. |
|
|
|
Jerry Scoope
From:
Denver,Colorado, USA
|
Posted 29 Jan 2008 6:24 pm msa
|
|
Bill you've got mail
Jerry
_________________
MSA Classic XL Mullen RP D-10
Ampeg Gemini I amp Peavey Vegas 400
www.GospelTrailMinistry.org |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 29 Jan 2008 6:25 pm
|
|
| Got it! |
|
|
|
basilh
From:
United Kingdom
|
Posted 29 Jan 2008 6:42 pm Re: This MSA just does not look right....
|
|
Bill if you click the "Quote" button on THIS post you'll see the way I wrote the BBCode..so that your long URL became this :-
Click Here
For Bill #2
Click Here |
|
|
|
basilh
From:
United Kingdom
|
Posted 29 Jan 2008 6:45 pm
|
|
| Quote: |
| It probably has to have all that junk in there to get you there. |
No, click my links and see..
Or better still click the link in bob's post to the BBCode.. |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 29 Jan 2008 7:42 pm
|
|
BAz. I clicked on b0bs' link and read about two lines.....man it is easier to play over a half diminished chord with an unknown tuning than figure all that out!
Thanks for trying though. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 29 Jan 2008 9:13 pm
|
|
| Bill Hatcher wrote: |
If it is all MSA where is the opening for the C6 changer and the screw holes for the neck and keyhead?? |
They're in the old mica/plywood body, which someone evidently trashed (and replaced with a new, home-made body). |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 29 Jan 2008 10:18 pm
|
|
| Bill Hatcher wrote: |
BAz. I clicked on b0bs' link and read about two lines.....man it is easier to play over a half diminished chord with an unknown tuning than figure all that out!
Thanks for trying though. |
| Code: |
[url=http://cgi.ebay.com/ws/eBayISAPI.dll.etc.etc.]CLICK HERE[/url] |
does this:
CLICK HERE
The problem is that those long URLs cause horizontal scrollbars on the whole page, which makes it hard to read for everyone.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
John Drury
From:
Gallatin, Tn USA
|
Posted 30 Jan 2008 5:24 am
|
|
There were loafers made back in the day with double neck endplates but I guess there should still be screwholes for the pad. Maybe you guys are right about the home made cabinet.
Post the serial numbers and this whole mess can be cleared up very quickly by the "Reece".
_________________
John Drury
NTSGA #3
"Practice cures most tone issues" ~ John Suhr |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 30 Jan 2008 6:08 am
|
|
| b0b wrote: |
| Bill Hatcher wrote: |
BAz. I clicked on b0bs' link and read about two lines.....man it is easier to play over a half diminished chord with an unknown tuning than figure all that out!
Thanks for trying though. |
| Code: |
[url=http://cgi.ebay.com/ws/eBayISAPI.dll.etc.etc.]CLICK HERE[/url] |
does this:
CLICK HERE
The problem is that those long URLs cause horizontal scrollbars on the whole page, which makes it hard to read for everyone. |
b0b. I believe I understand what you are saying now, even though when I clicked on your "click here" the Ebay page comes up fine with no horizontal scrollbars at all. So you are saying that some people will get these and some won't with the long URL? |
|
|
|
Steven Black
From:
Gahanna, Ohio, USA
|
Posted 30 Jan 2008 6:15 am MSA
|
|
| That knee lever probably works quite smoothly sitting on top of the guitar. |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 30 Jan 2008 6:54 am
|
|
b0b/Basil, Is this ok?
http://tinyurl.com/2txzk6
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
