| Author |
Topic: Online - Band-In-A-Box Seminar |
Ray Walker
From:
Smithfield, NC, USA, R.I.P.
|
Posted 26 Jan 2008 7:39 am |
|
There will be a seminar this coming Tuesday night in the International Steel Guitar Conference Center™ on the topic of using Band-In-A-Box. More and more people have turned to using this software for making tracks and recording…but don’t really know how to get the most out of it. The new band in a box software has a lot of “real” instruments as well as many more “midi” files. How you put them together to make really good tracks is something many folks have wanted to do for some time. George Wixon is an expert on this topic and will be there to demonstrate and answer questions. Chuck Campbell will also be on hand as the BIAB Dealer. You will hear actual recordings made with BIAB and you’ll get to ask, “how did you do that”. We will show you how to also add vocals to your tracks for those who want to “back a singer”. The seminar will start promptly at 8:00 PM eastern time. We look forward to seeing you there.
Ray Walker/Don Poland
The International Steel Guitar Conference Center™
www.isgcc.com |
|
|
 |
Roy Ayres
From:
Riverview, Florida, USA, R.I.P.
|
Posted 26 Jan 2008 4:09 pm
|
|
Ray,
What's the chance of getting this seminar at the St. Louis convention next September?
_________________
Pioneers of Western Swing HOF, Seattle 2005
Western Swing Music HOF, Sacramento 2006
International Steel Guitar HOF, St.Louis 2007
Visit my Web Site at RoysFootprints.com
Browse my Photo Album and be sure to sign my Guest Book. |
|
|
|
Richard Ingley
From:
Bowie, Texas, USA
|
Posted 26 Jan 2008 6:39 pm
|
|
| For what it may be worth, we have a Band In A Box Seminar each year at the Texas Steel Guitar Jamboree. That is the second weekend in March at the Sheraton Grand Hotel at DFW. Y'all come. |
|
|
|
Ray Walker
From:
Smithfield, NC, USA, R.I.P.
|
Posted 27 Jan 2008 6:04 am
|
|
Roy, that's something you may want to discuss with Scotty. Our organization has nothing to do with Scotty's. Thanks for your info Richard. I was not aware that BIAB was at the Texas show....but then we usually stay pretty busy down there with our own organization and booth...heck we might see you there this year.
Ray |
|
|
|
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 27 Jan 2008 10:12 am
|
|
 Ray i'm really happy with my B.I.A.B. and i am looking forward to learning more about it this Tuesday evening . I have made up songs for my wife who does solo singing and as soon as i get enough songs made i can play steel for her with the tracks . Along with many others i to have some questions to ask . See you soon ( so to speak ) . G.P. |
|
|
|
KENNY KRUPNICK
From:
Columbus, Ohio
|
Posted 27 Jan 2008 11:15 am
|
|
Sounds like I should participate in this seminar too.  |
|
|
|
Ray Walker
From:
Smithfield, NC, USA, R.I.P.
|
Posted 27 Jan 2008 2:30 pm
|
|
You betcha Gary....I do the same thing here on my wifes stuff as well as much of mine. Once you know "how" to use all of the functions and understand midi a bit better...the whole world opens up. Now there will never be anything that replaces a live musician...but having produced an entire show using midi files and enhancements.....it's a bout as close as you'll ever get. The technology today is far better than it used to be and it's getting better by the day. I'll see ya Tuesday.
Ray |
|
|
|
Ron Randall
From:
Dallas, Texas, USA
|
Posted 27 Jan 2008 3:30 pm
|
|
Ray,
What is meant by "On-Line BIAB seminar". |
|
|
|
Lloyd Potter
From:
Preston Hollow,New York, USA
|
Posted 27 Jan 2008 6:01 pm BITB
|
|
| Ray, is this going to be on the internet and can we sign in to attend......Lloyd |
|
|
|
Dale Gray
From:
Colorado, USA
|
Posted 29 Jan 2008 5:35 pm Just music
|
|
Went over there, but it was only music. I guess the seminar was canceled.
_________________
GFI SD10.Vegas 400, Oblong pedal, Rocket Scientist. |
|
|
|
Graham
From:
Marmora, Ontario, Canada
|
Posted 30 Jan 2008 5:49 pm
|
|
Dale:
The seminar most definately wasn't cancelled last night. Started at 8:00 pm Eastern and ran until approx. 10:00. You missed a very informative session.
_________________
Rebel� |
|
|
|
Don Poland
From:
Hanover, PA.
|
Posted 30 Jan 2008 5:59 pm
|
|
| As Graham stated the seminar was indeed held last night and George Wixon did a wonderful job. Everyone enjoyed themselves and had a wonderful time and learned a lot. |
|
|
|
Ray Walker
From:
Smithfield, NC, USA, R.I.P.
|
Posted 31 Jan 2008 5:17 am
|
|
Some interesting observations here. I will make a post over on Steel On The Web so that this post doesn't take up space in an area otherwise used for announcements. There I will go over a few things that will help folks understand a little more about who we are and what we actually do at our site. The gentleman who went to one of our sites and all he heard was music simply went to the wrong site. The site you ended up at is a site that allows you to listen to pedal steel guitar music and that is it. Please look over at our new post later on today and I will see if I can be more informative.
Ray Walker
ISGCC™ |
|
|
|
Sam White R.I.P.
From:
Coventry, RI 02816
|
Posted 31 Jan 2008 5:58 am Sam White (NESGA )
|
|
Hi Folks Like Ray Walker and others had said if you did not go on the Web site for this Seminar you missed a awful lot. I do not have a BITB but I sure leared a lot so that if I get one I will know something about it as I recorded the whole seminar.ONE more thing people look at the Time My Buddy Ray Walker got on the Forum to post his last post.YER he gets up before the chickens and after he got off the forum he went out to his Work shop in his back yard and went to work on some cabinets or more Walker Seats.Great guy that Ray and he has a wonderful wife Debbie and his boys.
Sam White |
|
|
|
