| Author |
Topic: legs for MSA Pedal Steel |
jeff reynolds
From:
Jackson, Ms.
|
Posted 3 Jan 2008 1:32 pm |
|
I need two Legs (adjustable type) for MSA Steels.
I really only NEED one but will buy two to get a matching pair. |
|
|
 |
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 3 Jan 2008 5:10 pm Steel Guitar Legs
|
|
Jeff,
I sent you an email about a pair I have that came from an Emmons guitar.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 3 Jan 2008 5:22 pm
|
|
I replaced 4 legs on my 74 MSA Classic and they were
about 1 1/2 to 2 inches shorter than normal which
may have been changed before I got it.
But I jumped on it and cut 1 1/2 inches off
which left about 1/2 of dowel left in the legs so
I had a hard time gettin these out.
The best is measure and the new legs may be right.
If not get a long rod and stick thru the bottom of
the leg and knock the threaded insert out and then
you can cut off what you want and re-install the
insert. Put a nut of the threads before you hit it. |
|
|
|
Don Burrows
From:
Ashtabula, Oh. USA
|
Posted 4 Jan 2008 2:34 am
|
|
I make telescopic stainless steel legs in any length and any size threaded stud.
Email me for prices.
_________________
Don Burrows
Builder of BSG Steel Guitars |
|
|
|
