Author |
Topic: Anyone play sax as well as steel? |
Len Amaral
From: Rehoboth,MA 02769
|
Posted 10 Feb 2015 10:38 am
|
|
OK, pedal steel can keep you busy and many steel players play guitar. Does anyone do double duty on sax? Thinking about taking a shot at playing this instrument. Any insight is appreciated. |
|
|
|
Earnest Bovine
From: Los Angeles CA USA
|
Posted 10 Feb 2015 11:18 am
|
|
I don't play sax as well as steel. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 10 Feb 2015 11:21 am
|
|
Danny Naccarato plays both with Gene Watson. And, very well I might add. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Jim Smith
From: Midlothian, TX, USA
|
Posted 10 Feb 2015 11:37 am
|
|
Big Jim Murphy played both very well. |
|
|
|
Bill Sinclair
From: Waynesboro, PA, USA
|
Posted 10 Feb 2015 12:17 pm
|
|
I play sax a lot better than I play steel. Could be cuz I've been playing sax for 40 some years and steel for about 10 months. Truth be told, I'm not that great on either. To answer your question though, the sax is fairly easy to start making something like music on in a short amount of time. The two middle octaves share the same fingering for both octaves making it fairly intuitive to find most of the notes. It takes a little bit of time to develop the muscles in your mouth (your embouchure)to be able to play consistently in tune and, as with any instrument, a good bit longer to develop good tone. It's a little easier to learn on an alto sax but if you plan to play rock, rock-a-billy or in a swing combo you're probably going to want a tenor. I think sax is a great contrast to steel guitar and makes a good instrument to double on. You might not want to take my word for it though, my main instrument is harmonica! |
|
|
|
Jim Cohen
From: Philadelphia, PA
|
|
|
|
Len Amaral
From: Rehoboth,MA 02769
|
Posted 10 Feb 2015 1:00 pm
|
|
Bill,
Thanks for the response and I also play a bit of harmonica so maybe the breathing part will be helpful. Any suggestions for an intermediate sax rather than an entry level model? |
|
|
|
Jim Cohen
From: Philadelphia, PA
|
|
|
|
Bill Sinclair
From: Waynesboro, PA, USA
|
Posted 10 Feb 2015 3:00 pm
|
|
A Conn "Naked Lady" is a well-regarded vintage horn. That sax spanned a couple of decades though, and I don't know what differentiates the pricey models from the not-as-pricey ones. As I recall, Jim's son has a degree in sax so I'm sure he knows. A local band instrument repair facility might be a good place to inquire about various models or maybe even rent one for a couple of months to see if it suits you. I have an early 60's Buffet Super Dynaction tenor - which is a better horn than I deserve. My alto and soprano are late 20's Buescher models that suit me just fine as a weekend player. Modern horns are generally better ergonomically but I'm not an especially fast player anyway. Without jumping on anything, peruse ebay for a couple of weeks to get an idea of what's out there. I'd be happy to give any assistance I can in your decision making. You can email me at: bills -at- linkelectric -dot- com |
|
|
|
Doug Palmer
From: Greensboro, North Carolina, USA
|
Posted 10 Feb 2015 3:33 pm Sax
|
|
I have played both all of my career. It works out great and I have rarely been out of work. I play tenor and alto , but the tenor works best for me. Although I play a Bundy, if I were to purchase a new horn it would be a
Yamaha. Great value. _________________ Emmons D-10, ST-10,LD-10 III, NV-112,Fender Deluxe Reverb. Authorized wholesale dealer musicorp.com! |
|
|
|
Len Amaral
From: Rehoboth,MA 02769
|
Posted 10 Feb 2015 4:55 pm
|
|
Thanks to all for the insight and info on the saxophone. At 66 I think I am going to rent one for a bit to see if I can get the rudiments down and get the basics. |
|
|
|
Earnest Bovine
From: Los Angeles CA USA
|
Posted 10 Feb 2015 6:45 pm
|
|
Len Amaral wrote: |
At 66 I think I am going to rent one for a bit to see if I can get the rudiments down and get the basics. |
Mastery requires a lifetime, but I think you will find it very easy to get started on sax. Within a few seconds you will probably play better than any U S president. And within a few minutes you will probably be able to play a few scales slowly. |
|
|
|
Bill Cunningham
From: Atlanta, Ga. USA
|
Posted 10 Feb 2015 8:05 pm
|
|
I haven't played sax since high school. I have not played a steel guitar since last month. _________________ Bill Cunningham
Atlanta, GA |
|
|
|
Charlie McDonald
From: out of the blue
|
Posted 11 Feb 2015 4:48 am
|
|
Earnest Bovine wrote: |
Within a few seconds you will probably play better than any U S president. |
What Earnest says is true. A friend in NYC gave me a C melody sax long about the time I fell in love and the universe and all its abilities were mine.
I could play it right off, and with absolutely no practice didn't progress on it a bit.
There is a calling... 'Learn to work the saxaphone, I'll play just what I feel.' |
|
|
|
Jim Park
From: Carson City, Nv
|
Posted 11 Feb 2015 6:23 am
|
|
Eddie Rivers with Asleep at the Wheel plays Sax as well as Pedal Steel and Non Pedal steel |
|
|
|
Jan Viljoen
From: Pretoria, South Africa
|
Posted 11 Feb 2015 10:38 pm
|
|
I play sax too. The C fingering is just like a recorder's.
I took to it instinctively.
I usually play a Yanagisawa tenor, but I was lucky to snare a Keilwerth alto from a pawn shop.
I get headaches sometimes, so I am more inclined to stringed instruments.
I use a C* jazz metal mouthpiece.
Ever heard of a pedal steel guitar?
It was derived from a plank with strings.
Picture with my sister on her 50th birthday bash.
Send it brothers!
_________________ Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS. |
|
|
|
Clete Ritta
From: San Antonio, Texas
|
Posted 12 Feb 2015 1:08 am
|
|
I play alto Been thinking of getting a clarinet which is what I started on back in 5th grade. Same fingering for many orchestral instruments actually (Boehm). |
|
|
|
Bill Sinclair
From: Waynesboro, PA, USA
|
Posted 12 Feb 2015 5:42 am
|
|
Jan,
That's a gorgeous silver tenor but your 50 year-old sister knocks it out of the park! |
|
|
|
Jack Hanson
From: San Luis Valley, USA
|
Posted 12 Feb 2015 1:38 pm
|
|
Didn't Sol Hoopii also play the sax? |
|
|
|
Dan Chambers
From: Iowa, USA
|
Posted 13 Feb 2015 7:17 pm
|
|
Bill Sinclair pretty much nailed it. I was a Sax major in college and played Tenor and Pedal Steel in a road band after. When Disco hit and took out the whole funk/big band thing I went exclusively to Pedal Steel and only briefly looked back at the saxophone several years later.
The musculature (embouchure) required to do even an adequate job on sax is much harder to acquire/reacquire than any stringed instrument I've ever played. _________________ Justice Pro Lite 3x5. Emmons D10 PP 8x5, Peavey Session & Nashville 400s,Martin D-28, Taylor 510, Eastman E20P, Weber Gallatin Mandolin, OMI D40 squareneck Dobro |
|
|
|
Russ Wever
From: Kansas City
|
Posted 15 Feb 2015 12:50 pm
|
|
Quote: |
Topic: Anyone play sax as well as steel? |
By that, do you mean play sax 'as good as' they play steel
. . . or do you mean play sax 'in addition to' play steel?
In any regard you can add Wally Murphy to the list
of 'Saxophonic Steelplayers', or, to the list of
'Steelophonic Sax Players', as the case may be.
~Rw _________________ www.russface
www.russguru |
|
|
|
Jim Cohen
From: Philadelphia, PA
|
|
|
|
Joachim Kettner
From: Germany
|
Posted 19 Feb 2015 10:27 am The Other Side Of The Sun
|
|
This song played with a good backing track would be nice for steel and sax, if you like that style.
https://www.youtube.com/watch?v=uHOjhGAQKu8 _________________ Fender Kingman, Sierra Crown D-10, Evans Amplifier, Soup Cube. |
|
|
|
Jerry Cobetto
From: Glen Carbon, Illinois, USA
|
Posted 13 May 2015 2:33 pm
|
|
Len, so glad you asked that! I, myself, play sax AND steel! Sax is my primary instrument, but I've also been playing pedal steel for 35 years. I've always had a passion for the steel guitar, even though I've been playing saxophone since I was 10 years-old, and studied music with that instrument in college. Hmmm.... other sax and steel players??? Big Jim Murphy ("God rest his soul!") was a FINE steel and sax player! Also, there's a western swing "cat" (a Hispanic gentleman, but can't think of his name) that
does. Eddie Rivers (current steel player with Asleep at the Wheel) also does, and does quite well. Further, a gentleman who is one of my Facebook friends, who used to perform with Billy Crash Craddock years ago, also does. Sorry, can't think of his name, right now, either! There are more of us than what people realize. I think it has a lot to do with the sax (of course) and steel being two instruments that lend themselves well to jazz, blues, etc. _________________ Gibson Console D-8, Miller Custom D-10, Sho-Bud (Pro-III Prototype) D-10, Fender Artist D-10 |
|
|
|
George Duncan Sypert
From: Colo Spgs, Co, USA
|
Posted 13 May 2015 2:44 pm
|
|
Chuck Lettes in Denver plays a Tenor sax, pedal steel, lap steel, etc.
Wish I could play any of the above. |
|
|
|