| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic wouldn't you think...
Reply to topic
Author Topic:  wouldn't you think...
Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 10 Jan 2006 12:12 pm    
Reply with quote

Somebody would make a cool cheapie lapsteel with these available?
http://www.musiciansfriend.com/srs7/g=guitar/search/detail/base_pid/302711/

View user's profile Send private message Send e-mail
Mike D

 

From:
Phx, Az
Post  Posted 10 Jan 2006 3:38 pm    
Reply with quote

Ceramic magnets, 14K output....sounds like a 'metal' pickup to me. At the bridge you'd probably get some really snarky tones. Dark, till it overdrove the amp, then lots of distortion.

------------------
Half-assed bottleneck and lap slide player. Full-assed Builder of resonator instruments.
View user's profile Send private message Send e-mail
Andy Zynda


From:
Wisconsin
Post  Posted 10 Jan 2006 4:10 pm    
Reply with quote

I've heard similar humbuckers, and they are exactly as described above. All gain, very little tone.
I'll take a cheap single coil any day, over any humbucker except a Joe Barden.
2 cents.
-andy-
View user's profile Send private message Send e-mail
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 10 Jan 2006 4:55 pm    
Reply with quote

I have used three of the DiMarzio 702 bridge pickups, and they sounded great.. never heard any other models of the seven string types. I used a Seymour Duncan seven string bridge pickup on one guitar, but it didn't come close to the 702 DiMarzio.
View user's profile Send private message Send e-mail
Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 10 Jan 2006 4:57 pm    
Reply with quote

Well, guys, you missed my point. (its on top of my head)

Seriously the point was its a 7-string pup for cheap. The world needs a cheap 7-string lapsteel.
Also, being a Dimarzio it has wiring that would allow 14k series, 7k parallel humbucker, or 2 7 k single coils
View user's profile Send private message Send e-mail
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 10 Jan 2006 5:03 pm    
Reply with quote

CHUCK: WHY? Does the world need a cheap 7-string lap steel? Aren't there enough cheap 8-stringers floating around out there?

Some folks refer to the number of strings on their steel guitar as tho' they're describing their boat, RV trlr or ........... whatever, that's 22 feet longer than his'ns.
View user's profile Send private message Send e-mail Visit poster's website
Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 10 Jan 2006 7:32 pm    
Reply with quote

I mean like an Artesian or Morrel cheap. I see 8s but the hardware is expensive enough to make them $300+. 7 is cool for some things, you can get wide spacing easy, I love my 8s and my 6s, it just looks like the parts to do a 7 cheep are readily available.
View user's profile Send private message Send e-mail
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 11 Jan 2006 8:00 pm    
Reply with quote

A person could probably play a lot of stuff on 5 strings if so desired. I personally like seven, although I use eight on one neck of a D8 and seven on the other. I have built only one six string guitar, back in 1953, and everything since has been seven or eight. Many people can make a lot of music on six strings for sure.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron