| Author |
Topic: Need Zane Beck pull rod tuning piece |
Norris Ashment
From:
Idaho Falls Idaho, USA
|
Posted 20 Oct 2007 1:03 pm |
|
I sure need one of these pull rods for the 5th string.The round end will not stay in the slot. Thanks
 |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 20 Oct 2007 1:27 pm
|
|
Hi Norris, I'm sorry, but I can't tell what you are showing. What exactly do you need?
Jerry |
|
|
|
Norris Ashment
From:
Idaho Falls Idaho, USA
|
Posted 20 Oct 2007 2:31 pm ZB
|
|
Sorry I meant the 4th string for 2nd pull.here it is with tuning nut on the end
 |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 21 Oct 2007 9:39 am
|
|
Norris, I'm sorry but I have never seen anything like that.
Jerry |
|
|
|
richard burton
From:
Britain
|
Posted 21 Oct 2007 9:52 am
|
|
Norris,
If the rod is falling out when the second raise is activated, perhaps a very light spring attached to the rod would keep it at the front of the slot in the changer finger ?
 |
|
|
|
Norris Ashment
From:
Idaho Falls Idaho, USA
|
Posted 21 Oct 2007 11:07 am ZB
|
|
| Now that spring idea might just work. Good thinking |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 21 Oct 2007 12:41 pm
|
|
| Norris, someone jury rigged that rod. Its not standard. ZB's use spokes with nipples. |
|
|
|
Norris Ashment
From:
Idaho Falls Idaho, USA
|
Posted 21 Oct 2007 1:46 pm
|
|
| I finda figured they did,how ever I put a tension spring on it and it works just fine. I have no idea what the real deal would look like that would be tuneable on the 2nd row down of end plate holes. |
|
|
|
Russ Tkac
|
Posted 21 Oct 2007 1:48 pm Looks like mine
|
|
| I have a second raise that looks like that as well. |
|
|
|
Norris Ashment
From:
Idaho Falls Idaho, USA
|
Posted 21 Oct 2007 1:55 pm
|
|
I am going to put this up for sale in the next day or two. I've all I can do for it. At least I got all the knee levers working. It is a gorgeous old guitar.
 |
|
|
|
B. Greg Jones
From:
Middleport, Ohio USA
|
Posted 21 Oct 2007 7:05 pm
|
|
Norris, that is a factory ZB pull rod. Original equiptment for the 4th string 1/2 tone raise. I have some of these in stock. Another option is you can use another pull rod connecting to the singletree and run straight through the changer in the middle row of holes. It will work the same way. Shoot me an email and tell me what you need.
Greg |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 21 Oct 2007 8:24 pm
|
|
| Greg would know. |
|
|
|
