Sierra Session D-10 Keyless Gearless 9 pedal x 8 knee lever

Al Vesel · From: Chisholm, Minnesota, USA

For Sale: 1993 Sierra Session D-10 Black Mica with
Keyless Gearless Tuners (SN# SCD 105 978 93)
Slide Out modular pickups for easy interchangeability (now has 2 George L E-66's)
The Sierra half stop consists of an extra bell crank on the lever shaft & a special half stop rod. The rod is easily recognized from the others by a spring mounted on it. The spring loaded half stop rod has no nylon bushing and will not effect the changer. It travels freely until the spring stop washer contacts the changer frame, at this point it creates back pressure as the spring begins to compress. This point of pressure gives the knee lever a defined stop-feel & is adjusted at the endplate to the 1/2 tone between a whole step, as D between the D# and C#. The amount of "feel is also adjustable You can reset for "harder feel".
Changer is an all-pull triple raise/double lower.
THERE ARE ONLY 8 PEDALS HOOKED UP NOW. THERE IS A 9TH PEDAL. IS NOT HOOKED UP NOW,BUT JUST TAKES A FEW MINUTES TO HOOK UP AND COULD BE HOOKED UP TO ANYTHING YOU WOULD LIKE. 2 EXTRA BELL CRANKS COULD BE INSTALLED ON THE CROSS SHAFT FOR THE 9TH PEDAL. AS YOU CAN SEE FROM THE LAST PICTURE, THERE IS THE AREA FOR THE 9TH PEDAL TO BE HOOKED UP. EVERYTHING IS WITH GUITAR,INCLUDING PEDAL, ROD AND BELL CRANKS AND RODS TO ATTACH TO CHANGER. YOU CAN HOOK UP TO YOUR LIKING.
Extra parts includes extra bell cranks, extra rods and extra knee levers. There are also a lot of extra bell cranks on the guitar now that are not being used. All are polished chrome.
ALL KNEE LEVERS ARE POLISHED CHROME.

2 ea. of a 3-way switches for controlling the 3 pickup tones on each neck, one switch for each neck.

Control in the center is for neck selector, also has tone by-pass

COMES WITH THE FAMOUS WHEEL EZ FLIGHT CASE (nice handle with casters)
Maintenance Manual, tuning wrench

[b]When I got this, it reminded me when I bought my 1977 Cadillac Sedan Deville. THIS IS TRULY A WELL MADE GUTIAR. NO EXPENSE WAS SPARED IN THE MANUFACTURING OF THIS GUITAR, from the bell cranks, legs, pedal rack, polished chrome knee levers, polished chrome pedals, the rods even have protective rubber than slides over each changing rod. I can go on and on.

This guitar is not any heavier than my Mullen or other D-10's I have owned. And the quality of manufacturing is unsurpassed. I was truly amazed at the quality of all parts manufactured. Everything is made of the finest material that went into this guitar. The adjustments on the knee levers are great. You can swivel out or in with great ease to suite your body.

I WOULD RATE THIS GUITAR A 9-1/2 OUT OF 10. It is like new. No scratches anywhere on the chrome or the beautiful black mica. The only flaw I can find on the entire guitar is that one of the tuning pegs on the E9 neck for fine tuning has 1/2 of it cracked off. Not a problem, it still can be turned with ease. Cost on a new guitar comparable to this is $6,000.00

Price: $2,050.00 obo plus freight of $75.00
I GOT TO SELL THIS GUITAR, PRICE LOWERED TO $1,950.00. THAT'S DEFINITELY A STEAL FOR A STEEL.
COME ON, IT'S A D-10 LIKE NEW!!!

FINAL PRICE LOWERED TO $1,850.00.(also $75.00 freight)

IF IT DOESN'T SELL AT THIS PRICE IT'S OFF TO EBAY, OR ELSE TAKE OFF THE MARKET FOR A WHILE. IT'S A BUYER'S MARKET OUT THERE NOW. A LOT OF STEEL'S TO CHOOSE FROM!!!

Al Vesel
Email alvesel@mchsi.com
phone 218-254-2082
cell 218-969-3147

[/b]

_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Al Vesel · From: Chisholm, Minnesota, USA

T.T.T. I just lowered price on this fine guitar.
Al
_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Sonny Miller · From: Lino Lakes, Minnesota, USA

Al,What height is this guitar. It looks a little taller than most guitars. But it sure looks beautiful. Very Happy

Al Vesel · From: Chisholm, Minnesota, USA

Sonny, both front and back legs are adjustable. Front legs where pedal rack is, there are set screws you loosen and leg length can be adjusted to any length you want. Back legs are the same principal, but rather than a set screw they have a nice wing nut w/ large plastic handle to easily turn. I have attached pictures to show you this.

Al

PS See you on Saturday or Sunday Sonny. I'll give you a call to confirm when I will be there.

TXS

Al

_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Al Vesel · From: Chisholm, Minnesota, USA

T.T.T.for a great price on a great guitar.

Al
_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Al Vesel · From: Chisholm, Minnesota, USA

t.t.t.

Al
_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Al Vesel · From: Chisholm, Minnesota, USA

Bob,

Sierra sold pending payment

Please close-donation to follow after payment received.

Al Vesel
_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's

Forum Index > For Sale: Steel Guitars		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: